...
coming soon...
In Progress...
1135
To use the projector you will need podium access (please see below for instruction). After swiping your ID through the card reader the screen should turn on/allow you to use the projector. This is the initial screen you will see and from there you can select a source (Laptop, DVD, VCR, Aux Video, Doc Cam, or Blank Image). Please note the right hand side which allows you to adjust the volume/mute the source and microphone. The screen buttons up/down on the bottom left hand side will allow you to put the projector screen up or down (the screen will also go up once you swipe out of the podium or select 'System Off' on the upper right hand side)
Select a source -> Laptop
Select a source -> DVD
Select a source -> VCR
...
Select a Source -> Blank Image (This can be used when, for example, you don't want what you're doing on your laptop to be displayed to the projector)
1215
To use the projector you will need podium access (please see below for instruction). After swiping your ID through the card reader the screen should turn on/allow you to use the projector. This is the initial screen you will see and from there you can select a source (Elmo, VCR, PC, DVD, or Main Menu). Please note the right hand side which allows you to adjust the volume/mute the source and microphone. The buttons on the left hand size of the screen allow you to lower/raise the projector, stop the screen, or turn the system off.
Elmo
VCR
PC
DVD
1135 & 1215 Card Swipe Access
...