...
- Run the Yubikey Manager application and insert your key
- Click on Applications and then click on PIV
- Click on Change PIN if Yubikey is fresh out of the box or it's been defaulted
- Click on Configure PINs
- Click Change PIN and then check Use default (if it is default).
Fill in the blanks.
Finish with changing PIN by clicking on Change PIN - Click on Change PUK and then check Use default (if it is default).
Fill in the blanks.
Finish with changing PUK by clicking on Change PUK - Click on Change Management Key and then check Use default (if it is default).
Fill in the blanks.
Finish with changing the key by clicking on Finish- You can check Protect with PIN to not need the Management Key for future
- You can check Protect with PIN to not need the Management Key for future
- Click on Configure PINs
- Go back to Applications and then PIV
- Click on Configure Certificates
- Click on Authentication and then Generate
- Check the radio for Certificate Signing Request and then click Next
- Select RSA2048 and then click on Next
- Input a decent subject text (ala username) and then click on Next
- The next page gives you a summary of what you've done. When you click Generate, it will open a save dialog to save the .csr file.
- Click on Configure Certificates