...
- Run the Yubikey Manager application and insert your key
- Click on Applications and then click on PIV
Change PIN if Yubikey is fresh out of the box or it's been defaulted
Note skip to (Which Certificate Is Right For Me?) if Yubikey is already initialized
- Click on Configure PINs
Click Change PIN and then check Use default (if it is default).
Choose a PIN between 6 - 8 characters.
Finish with changing PIN by clicking on Change PINNote This The PIN used to unlock and utilize the certificates on the Yubikey. You will have 3 tries to input the correct PIN.
Click on Change PUK and then check Use default (if it is default).
Choose a PUK between 6 - 8 characters.
Finish with changing PUK by clicking on Change PUKNote The PUK is used to unblock the PIN if it becomes locked. You will have 3 tries to unblock the PIN.
- Click on Change Management Key and then check Use default (if it is default).
Click on Generate a few times to randomly create a new management key.
Choose AES256 as Algorithm.
Finish with changing the key by clicking on Finish
- Click on Configure PINs