Page Comparison

Before the launch, in order to certify you must complete and have the following the following:

...

Launch Initiative Pre-Flight Checklist

•  Launch Lugs
  •  Well secured to body tube
  •  Verify smooth fit on piece of 80/20 rail
•  Nosecone Screw
  
  •  Secured and fastened into payload bay
•  Fin Check
  •  Wiggle Test (you should be able to lightly wiggle the fins with out them moving
  •  Tangential Perpendicularity
    
    
    
  •  Neutral Pitch
    
  •  Fillet Check
    •  No rough surfaced around fin & body tube
    •  Leading edges on fins are smooth
    •  Verify they DO NOT look like Lightwave™  fillets 
•  Center of Pressure
  •  Video about how to calculate (for educational reference) 
  •  Watch this video for a practical understanding and evaluation 
  •  Mark the center of pressure (use standard symbols)  on your rocket! 
    • We use typically openRocket to find this
•  Mark the Center of Gravity on your rocket
  •  Mark where the rocket balanced with motor in
•  Calculate stability
  •  Manually or with openRocket
  •  At least >2
•  Record the mass of your rocket