Week 13 |
Assignee / Action Item / Description | Date Assigned: | Complete By: | Completion Date: | Comments: | Resolution |
---|
Everyone: - Figure out what part of the rocket you'll present for the CDR.
| 11/7/2020 | 11/14/2020 |
|
|
|
Modeling/Simulation: - Run motor simulation for final OpenRocket model(after parachute calculation is made and parachutes are updated), and put in CDR
| 11/7/2020 | 11/14/2020 |
|
|
|
Avionics: - Generate slides for the COTS avionics system
- Overview of COTS avionics w/ James
- (If pursuing) decide what the custom avionics board should be capable of.
| 11/7/2020 | 11/14/2020 |
|
|
|
CAD Designer: - Create entire CAD model for rocket, driven by OpenRocket model
| 11/7/2020 | 11/14/2020 |
|
|
|
Website/Media Designer: - Add team mission to website
| 11/7/2020 | 11/14/2020 |
|
|
|
Presentation Designer: - Create blank CDR slides for Thrust to Weight Ratio, OpenRocket Model, Fin Flutter calculations, CAD model, Parachute calculations, and anything else not listed that was in the PDR
| 11/7/2020 | 11/14/2020 |
|
|
|
BOM Maker: - Add parachute given by Numbers Person to BOM
- Add coupler tubes to BOM
- Add rocket motor to BOM
| 11/7/2020 | 11/14/2020 |
|
|
|
Numbers Person: - Calculate Thrust to Weight ratio for the rocket and add to the CDR
- Calculate ideal parachute diameters, use this number to drive our parachute choice (from this website), and add all that info to the CDR
- Give parachute choice to BOM Maker to add
| 11/7/2020 | 11/14/2020 |
|
|
|