Versions Compared

Old Version 34

changes.mady.by.user Andrew Couture (RIT Student)

Saved on

compared with

New Version 35

changes.mady.by.user James May (RIT Student)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Week 13
Assignee / Action Item / DescriptionDate Assigned:Complete By:Completion Date:Comments:Resolution

Everyone:

  •  Figure out what part of the rocket you'll present for the CDR.
11/7/202011/14/2020


Modeling/Simulation:

  •  Run motor simulation for final OpenRocket model(after parachute calculation is made and parachutes are updated), and put in CDR
11/7/202011/14/2020


Avionics:

  •  Generate slides for the COTS avionics system
  •  Overview of COTS avionics w/ James
  •  (If pursuing) decide what the custom avionics board should be capable of.
11/7/202011/14/2020


CAD Designer:

  •  Create entire CAD model for rocket, driven by OpenRocket model
11/7/202011/14/2020


Website/Media Designer:

  •  Add team mission to website
11/7/202011/14/2020


Presentation Designer:

  •  Create blank CDR slides for Thrust to Weight Ratio, OpenRocket Model, Fin Flutter calculations, CAD model, Parachute calculations, and anything else not listed that was in the PDR
11/7/202011/14/2020


BOM Maker:

  •  Add parachute given by Numbers Person to BOM
  •  Add coupler tubes to BOM
  •  Add rocket motor to BOM
11/7/202011/14/2020


Numbers Person:

  •  Calculate Thrust to Weight ratio for the rocket and add to the CDR
  •  Calculate ideal parachute diameters, use this number to drive our parachute choice (from this website), and add all that info to the CDR
  •  Give parachute choice to BOM Maker to add
11/7/202011/14/2020



Week 14
Assignee / Action Item / DescriptionDate Assigned:Complete By:Completion Date:Comments:Resolution

Everyone:

  •  Prep for CDR!
  •  Stress out about finals
  •  Don't get COVID
11/13/202011/21/2020


Modeling/Simulation:

  •  Fill out openrocket, rocket overview, and motor sim slide(s) on the CDR
11/13/202011/21/2020


Avionics:

  •  Figure out power draw of COTS avionics and spec a battery (with James' help)
  •  Put battery selection into CDR
  •  Tell BOM maker to add battery selection
  •  Bonus: Add slide talking about custom avionics board
11/13/202011/21/2020


CAD Designer:

  •  Make nosecone
  •  Finalize rocket assembly
  •  Bonus: Add rocket renders to CDR
  •  Bonus bonus: Add video of rocket assembling/disassembling to CDR
11/13/202011/21/2020


Website/Media Designer:

  •  Add some good looking rocket info/visuals to website (show peeps we're doing stuff)
11/13/202011/21/2020


Presentation Designer:

  •  Ensure CDR comes together well
  •  Coordinate who will discuss what
11/13/202011/21/2020


BOM Maker:

  •  Add shear pins to BOM based on numbers person calculation
  •  Add eye bolts to BOM based on numbers person calculation
  •  Add shock cord to BOM, based on numbers person calculation
11/13/202011/21/2020


Numbers Person:

  •  Do black powder charge calculations and spec shear pins (James will help)
  •  Add black powder charge calculations to CDR
  •  Do snatch force calculations, and use these to spec shock cord and eye bolts (James will help)
  •  Add snatch force calculations and design considerations to CDR
11/13/202011/21/2020



Over Break
Assignee / Action Item / DescriptionDate Assigned:Complete By:Completion Date:Comments:Resolution

Everyone:

  •  Make a page on the crowdfunding site
  •  Submit a list of 15 friends/family/peers emails for crowdfunding (ideally people who would consider donating)
  •  Enjoy Thanksgiving, and eat some turkey!(or tofurky, whatever floats your boat)
  •  Hope for a better 2021
11/13/2020



Modeling/Simulation:







Avionics:







CAD Designer:







Website/Media Designer:







Presentation Designer:







BOM Maker:

  •  Submit BOM to treasurer once its final
11/13/2020



Numbers Person: