Page Comparison

...

Task	Assigned	Comments/Progress/Blockers
CAD	Riley Quinn (RIT Student)	Camera bay Parachute 3 air brakes
FEA	Riley Quinn (RIT Student)
Order/find stock (plywood)	Nate Lloyd (RIT Student)	plywood is done at the moment, aluminium needs to be finished in CAD
Manufacture (router)
Assemble/ Epoxy to tube

...

Task	Assigned	Comments/Progress/Blockers
CAD	Riley Quinn (RIT Student)	just need the eye bolt holes, and need to pick an eye bolt.
FEA of Bulkhead	Riley Quinn (RIT Student)
FEA of Ibolts	Riley Quinn (RIT Student)
Order/find stock (1/2 aluminum)	Louis Fleisher (RIT Student)	Thickness of 1/2 over kill? answer it is it has been reduced in the cad
Manufacture (CAM)
Manufacture (tormach)
Assemble/ Epoxy to tube

...

Task	Assigned	Comments/Progress/Blockers
CAD
Calcs (fin flutter)	Louis Fleisher (RIT Student)	double check these calcs
Order/find stock (Fiber Glass)	Louis Fleisher (RIT Student)	Get quote from Send cut send instead of make in house
Manufacture (CAM)	Nate Lloyd (RIT Student)	Send cut send instead of make in house
Manufacture (crushinator or router)	Send cut send instead of make Nate Lloyd (RIT Student)	making in house
Manufacture slots in airframe tube
Jig to make slots in airframe
Epoxy fins into slots

...

Task	Assigned	Comments/Progress/Blockers
CAD Put into Assembly	Nate Lloyd (RIT Student)
Calcs FEA on PLates	Nate Lloyd (RIT Student)
Order/find stock (Aluminum) Stock Hardware motor	Nate Lloyd (RIT Student)
Manufacture Thrust plate Motor retainer Motor tube	Nate Lloyd (RIT Student)
Assembly Bolt together Order TBD	Nate Lloyd (RIT Student)

Airbrakes

Task	Assigned	Comments/Progress/Blockers
CAD/Assembly Pick L brakets and order/test	Jonah Gimmi (RIT Student)
FEA of ASSy	Jonah Gimmi (RIT Student)
FEA of joints	Jonah Gimmi (RIT Student)
Motor Selection from Calcs	Jonah Gimmi (RIT Student) Riley Quinn (RIT Student)
Snatch force calculation	Jonah Gimmi (RIT Student) Riley Quinn (RIT Student)
Airbrake equivalent of chute math	Jonah Gimmi (RIT Student) Riley Quinn (RIT Student)
Order/Find Materials BOM	Jonah Gimmi (RIT Student)	Ready to order L brackets (x10)
Manufacture Stock Rods/long screw Aluminum Blue tube Hardware
Assemble Integreate with Rocket Internal assembly Add action items as CAD is finished

...

Task	Assigned	Comments/Progress/Blockers
CAD/integrate with Rocket assembly Component selection Wire diagram New wire diagram for the Arduino Meet with avionics to discuss feasibility	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)
Figure out how to program the Arduino to accept PWM, and repeat the signal	Aaron Chan (RIT Student)
Order board motor gps Explore other options Reach out to Eggtimer for update on boards (2/18)	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)	BLOCKER due to low inventory explore other options Explore new flight computer options must support PWM And altitude/apogee detection Might have a proton somewhere Proton may not be viable. It only has a 2 second PWM pulse.
Manufacture Laser cut plywood (1/8th) Set screw in square rod hole	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)
Assemble Glue together slide into rocket	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)

...

Versions Compared