Page Comparison

...

Task	Assigned	Comments/Progress/Blockers
CAD	Riley Quinn (RIT Student) Nate Lloyd (RIT Student)	just need the eye bolt holes, and need to pick an eye bolt.
FEA of Bulkhead	Riley Quinn (RIT Student) Nate Lloyd (RIT Student)
FEA of Ibolts	Riley Quinn (RIT Student) Nate Lloyd (RIT Student)	checking McMaster-carr the one in fusion is probably too small and should be upped to maybe
Order/find stock (1/2 aluminum)	Louis Fleisher (RIT Student)	Thickness of 1/2 over kill? answer it is it has been reduced in the cad
Manufacture (CAM)
Manufacture (tormach)
Assemble/ Epoxy to tube

...

Task	Assigned	Comments/Progress/Blockers
CAD/integrate with Rocket assembly Component selection Wire diagram New wire diagram for the Arduino Meet with avionics to discuss feasibility	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)
Print 3D components
Figure out how to program the Arduino to accept PWM, and repeat the signal Detecting PWM Outputting PWM Running timed loop for PWM output	Aaron Chan (RIT Student)
Order board motor gps Explore other options Reach out to Eggtimer for update on boards (2/18)	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)	BLOCKER due to low inventory explore other options Explore new flight computer options must support PWM And altitude/apogee detection Might have a proton somewhere Proton may not be viable. It only has a 2 second PWM pulse.
Manufacture Laser cut plywood (1/8th) Set screw in square rod hole	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)
Assemble Glue together slide into rocket	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)

...

Versions Compared