...

•  Nose Cone (w/ Integrated Coupler)
  •  Tip Protector
  •  Nose Cone Screws M6 (x6)
•  Parachute Bay (Upper Body Tube)
•  Booster (Lower Body Tube)
  •  Motor Retainer w/ Screws (Attached to Booster)
•  Rocket Epoxy
  •  Scale
  •  Mixing Cups
  •  Popsicle Sticks
•  5 Minute Epoxy
•  Sandpaper
•  4-40 Shear Pins (>20)
•  3x PVC Rocket Stand 
•  Cordless Drill & Battery
•  Drill Battery Charger
•  Flat Head Screwdrivers
•  Phillips Head Screwdrivers
•  Drill Bit Set
•  Knife
•  FOR DISPLAY
  •  Extra Bulkhead(s)
    •  Weight Reduced
    •  Charge Caps
  •  Extra Rail Guide
  •  Old Boat Tail

Recovery

...

•  Recovery Pelican Case (covered w/ stickers)
  
  •  Main parachute
  •  Parachute bag
  •  5x face shields
  •  Streamer
  •  Flame blanket
  •  Swivel link
  •  4x quick links
  •  Eyebolt
  •  Shock cord
  •  Pack of 4-40 shear pins
•  RIT Launch BP Kit (green ammo box with "RIT Launch BP Kit" written on it)
  •  Pill bottle of 4F BP
  •  Glass contained of 4F BP
  •  1.5g measurement tubes
  •  Sharpie
  •  Paper
  •  Scissors
  •  Blue tape
  •  Nitrile gloves
•  RIT Launch Initiative Recovery Toolkit (Yellow Tool Box with a "RIT LAUNCH INITIATIVE RECOVERY" label on it)
  •  3x TD-2 kits
  •  Spare quick links
  •  1/2-13 nuts
  •  1/2-13 lock nuts
  •  2x charge cups
  •  Safety glasses
  •  Spare shock cord
  •  Charge cup threading cord
  •  Spare swivel
  •  Slip knot cord
  •  Hair tie
  •  Blue tape
  •  Electrical tape
  •  Pack of 4-40 shear pins
  •  Showerhead washers
  •  Lighter
  •  Ematches
•  Alan's Grabby Arm (FLIGHT CRITICAL)
•  James' Grabby Arm (FLIGHT CRITICAL)

Payload

Content

Avionics

TAKE PICTURES OF EVERY COMPOSITE ITEM, PACKED AND UNPACKED

•  Radio Pelican case Aaron Chan (RIT Student) 
  •  (Loose items) 10x HAM radio
  •  (Loose items) 12x FRS radio (11x currently. Donovan has his)
  •  (Bag) 3x APRS cable
  •  (Bag) Antenna bag
  •  (Loose item) BAOFENG charger
•  Avionics Pelican case Aaron Chan (RIT Student) 
  •  (Camo case) 433 MHz Yagi
  •  (Loose) Smaller 433 MHz Yagi
  •  (Loose) 900 MHz Yagi
  •  (Box) Avionics bay box
    •  (Loose) Delrin frame
      •  3x Finger Tech screw switches populated
    •  (Loose) COTS sled
    •  (Loose) Backplane sled
    •  (Loose) Big Red Bee bracket
    •  (Loose) Backplane battery case
    •  (Loose) 2x RRC3 battery case
    •  (Loose) 2x DE-9 bracket
    •  (Loose) 2x DE-9 cables
    •  (Bag) Tamiya E-match safeties
    •  (Box) Tamiya connector set
    •  (Loose) 4x Module spacers
    •  (Bag) Blue Loctite
    •  (Loose) Tweaker screwdriver
  •  (Box) COTS electronics box
    •  (Bag) 2x RRC3
    •  (Bag) Big Red Bee
      •  BRB PCB
      •  3700mAh EEMB battery
      •  2x BRB programmer
      •  2x JST-BRB adapter
    •  (Loose) 433MHz whip antenna
    •  (Loose) 2x RRC3 battery
    •  (Bag) RRC3 accessories
      •  RRC3 LCD
      •  RRC3 Dongle
    •  (Bag) Wiring
      •  2x XT-30 to ferrule
      •  2x Bridged breakouts
      •  2x arming key
    •  (Loose) 2x 2S USB balance chargers
    •  (Loose) 1x 1S USB charger
    •  (Loose) Length of 8-conductor cable
    •  (Loose) Length of large heat shrinke
    •  Extra XT30 Connectors
    •  Screwdriver
  •  (Pelican case) Backup avionics hardware case
    •  2x RRC3
    •  2x RRC2L
    •  2x Big Red Bee
    •  1x EEMB 3700mAh battery
    •  2x RRC3 battery
    •  4x Fingertech screw switches (bag)
    •  2x DE-9 connector
    •  2x DE-9 breakout
    •  Length of white 22AWG wire
    •  Length of large heat shrink
  •  (Bag) Spare 22AWG 8-conductor bulk cable
  •  (Loose item) PROMPT pressure tube
  •  (Soft case) Driver kit
  •  (Box) Multimeter
  •  (Bag) Multimeter leads set
  •  (Soft case) General crimp kit
    •  Crimp tool
    •  Open-barrel crimping anvil
  •  (Loose) 1x BNC-SMA cables
  •  (Loose) 1x N-SMA cables
•  Ground Station Aaron Chan (RIT Student) 
  •  2x batteries + barrel jack cables
  •  Router 
  •  Switch
  •  5x ethernet cable
  •  Keyboard
•  Toolbox (NOT ASSIGNED YET)
  
  •  Needle-nose pliers
  •  Wire stripper
  •  Kapton tape
  •  Electrical tape
  •  Solder
  •  Spade connector set
  •  Heat shrink set
  •  Flush cutters
  •  Diagonal cutters
  •  Larger screwdrivers
•  Backplane remainders 
  •  Backplane x3 
  •  Unpopulated autopilot module x5
  •  Sensor module x3
  •  Power module x3
•  Additional RF hardware Yevgeniy Gorbachev (RIT Student) 
  •  900 MHz antenna
  •  2x BNC to SMA cables (Arrow Yagi)
  •  2x N-type to SMA cables (900MHz Yagi, smaller 400MHz Yagi)
•  Standalone backplane set 1 Aaron Chan (RIT Student) 
  •  Dev module
  •  Backplane
  •  Power module
  •  Sensor module
  •  2x Radio module
  •  SwitchBlox
  •  Backplane Battery Box
    •  Balanced Charger
    •  Battery
    •  XT-60 TO Ferrule Adapter
  •  PROMPT
•  Standalone backplane set 2 Yevgeniy Gorbachev (RIT Student) 
  •  Dev module
  •  Backplane
  •  Power module
  •  Sensor module
  •  Radio module
  •  SwitchBlox

...