...
- Radio Pelican case Aaron Chan (RIT Student)
- (Loose items) 10x HAM radio
- (Loose items) 12x FRS radio (11x currently. Donovan has his)
- (Bag) 3x APRS cable
- (Bag) Antenna bag
- (Loose item) BAOFENG charger
- Avionics Pelican case Aaron Chan (RIT Student)
- (Camo case) 433 MHz Yagi
- (Loose) Smaller 433 MHz Yagi
- (Loose) 900 MHz Yagi
- (Box) Avionics bay box
- (Loose) Delrin frame
- 3x Finger Tech screw switches populated
- (Loose) COTS sled
- (Loose) Backplane sled
- (Loose) Big Red Bee bracket
- (Loose) Backplane battery case
- (Loose) 2x RRC3 battery case
- (Loose) 2x DE-9 bracket
- (Loose) 2x DE-9 cables
- (Bag) Tamiya E-match safeties
- (Box) Tamiya connector set
- (Loose) 4x Module spacers
- (Bag) Blue Loctite
- (Loose) Tweaker screwdriver
- (Loose) Delrin frame
- (Box) COTS electronics box
- (Bag) 2x RRC3
- (Bag) Big Red Bee
- BRB PCB
- 3700mAh EEMB battery
- 2x BRB programmer
- 2x JST-BRB adapter
- (Loose) 433MHz whip antenna
- (Loose) 2x RRC3 battery
- (Bag) RRC3 accessories
- RRC3 LCD
- RRC3 Dongle
- (Bag) Wiring
- 2x XT-30 to ferrule
- 2x Bridged breakouts
- 2x arming key
- (Loose) 2x 2S USB balance chargers
- (Loose) 1x 1S USB charger
- (Loose) Length of 8-conductor cable
- (Loose) Length of large heat shrinke
- Extra XT30 Connectors
- Screwdriver
- (Pelican case) Backup avionics hardware case
- 2x RRC3
- 2x RRC2L
- 2x Big Red Bee
- 1x EEMB 3700mAh battery
- 2x RRC3 battery
- 4x Fingertech screw switches (bag)
- 2x DE-9 connector
- 2x DE-9 breakout
- Length of white 22AWG wire
- Length of large heat shrink
- (Bag) Spare 22AWG 8-conductor bulk cable
- (Loose item) PROMPT pressure tube
- (Soft case) Driver kit
- (Box) Multimeter
- (Bag) Multimeter leads set
- (Soft case) General crimp kit
- Crimp tool
- Open-barrel crimping anvil
- (Loose) 1x BNC-SMA cables
- (Loose) 1x N-SMA cables
- Ground Station Aaron Chan (RIT Student)
- 2x batteries + barrel jack cables
- Router
- Switch
- 5x ethernet cable
- Keyboard
- Toolbox (NOT ASSIGNED YET)
- Needle-nose pliers
- Wire stripper
- Kapton tape
- Electrical tape
- Solder
- Spade connector set
- Heat shrink set
- Flush cutters
- Diagonal cutters
- Larger screwdrivers
- Backplane remainders
- Backplane x3
- Unpopulated autopilot module x5
- Sensor module x3
- Power module x3
- Additional RF hardware Yevgeniy Gorbachev (RIT Student)
- 900 MHz antenna
- 2x BNC to SMA cables (Arrow Yagi)
- 2x N-type to SMA cables (900MHz Yagi, smaller 400MHz Yagi)
- Standalone backplane set 1 Aaron Chan (RIT Student)
- Dev module
- Backplane
- Power module
- Sensor module
- 2x Radio module
- SwitchBlox
- Backplane Battery Box
- Balanced Charger
- Battery
- XT-60 TO Ferrule Adapter
- PROMPT
- Standalone backplane set 2 Yevgeniy Gorbachev (RIT Student)
- Dev module
- Backplane
- Power module
- Sensor module
- Radio module
- SwitchBlox
...