Page Comparison

...

Task	Assigned	Comments/Progress/Blockers
CAD	crb9080	Identify each component and confirm their accuracy Add material properties
CAD	Nathan Lloyd Donovan Barros (RIT Student)	Model the polycarbonate Ensure everything fits together
Order	Louis Fleisher (RIT Student)	Nose cone already ordered?
Assemble (epoxy to bulkhead)		What is the progress of this bulkhead it is attached to?

...

Task	Assigned	Comments/Progress/Blockers
CAD	Nathan Lloyd
CAD	Nathan Lloyd	Blue Tube Lengths
Order	Louis Fleisher (RIT Student)
Cut	Louis Fleisher (RIT Student) Nathan Lloyd

...

Task	Assigned	Comments/Progress/Blockers
CAD	Riley Quinn (RIT Student)	Camera bay Parachute 3 air brakes
FEA	Riley Quinn (RIT Student)
Order/find stock (plywood)	Nate Lloyd (RIT Student)	plywood is done at the moment, aluminium needs to be finished in CAD
Manufacture (router)
Assemble/ Epoxy to tube

...

Task	Assigned	Comments/Progress/Blockers
CAD	Riley Quinn (RIT Student)
FEA of Bulkhead	Riley Quinn (RIT Student)
Order/find stock (1/2 aluminum)	Louis Fleisher Riley Quinn (RIT Student)	Thickness of 1/2 over kill?
Manufacture (CAM)	Riley Quinn (RIT Student)
Manufacture (tormach)	Riley Quinn (RIT Student)
Mount Camera to bulkhead	Riley Quinn (RIT Student)
Assemble/ Epoxy to tube	Riley Quinn (RIT Student)

...

Task	Assigned	Comments/Progress/Blockers
CAD Put into Assembly	Nate Lloyd (RIT Student)
Calcs FEA on PLates	Nate Lloyd (RIT Student)
Order/find stock (Aluminum) Stock Hardware motor	Nate Lloyd (RIT Student)
Manufacture Thrust plate Motor retainer Motor tube Find Motor Tube Weight	Nate Lloyd (RIT Student)	Get Motor Tube Weight
Assembly Bolt together Order TBD	Nate Lloyd (RIT Student)

...

Task	Assigned	Comments/Progress/Blockers
CAD/Assembly Pick L brakets and order/test	Jonah Gimmi (RIT Student)
FEA of ASSy	Jonah Gimmi (RIT Student)
FEA of joints	Jonah Gimmi (RIT Student)
Motor Selection from Calcs	Jonah Gimmi (RIT Student) Riley Quinn (RIT Student)
Snatch force calculation	Jonah Gimmi (RIT Student) Riley Quinn (RIT Student)
Airbrake equivalent of chute math	Jonah Gimmi (RIT Student) Riley Quinn (RIT Student)
Order/Find Materials BOM	Jonah Gimmi (RIT Student)	Ready to order L brackets (x10)
Manufacture Stock Rods/long screw Aluminum Blue tube Hardware
Assemble Integreate with Rocket Internal assembly Add action items as CAD is finished

...

Task	Assigned	Comments/Progress/Blockers
CAD/integrate with Rocket assembly	crb9080
Order Camera Electronics ect from BOM	crb9080	Remember to order press fittings
Manufacture Create Jig to make slots/hole Cut slots in airframe Cut slots in airframeacrylic coupler 3D print Jig Hole in air frame for screw switch 3D print casing	crb9080 Donovan Barros (RIT Student)	3D print the mounts before cutting the tube to ensure fit
Assemble Integrate with Rods Epoxy to airframe Wire/connect	crb9080 Donovan Barros (RIT Student)

...

Task	Assigned	Comments/Progress/Blockers
CAD/integrate with Rocket assembly Bolt to make camera removable idea	Donovan Barros (RIT Student) Riley Quinn (RIT Student)
Order Camera Electronics ect from BOM	Donovan Barros (RIT Student)
Manufacture Lathe acrylic tube Aluminum stock? Steel Stock?	Donovan Barros (RIT Student)	Add what has to happen to be manufactured don't have in notes Acrylic coupler should be 4 inches on each side
Assemble Bolts Integration to airframe TBD	Donovan Barros (RIT Student)

...

Task	Assigned	Comments/Progress/Blockers
CAD/integrate with Rocket assembly Component selection Wire diagram New wire diagram for the Arduino Meet with avionics to discuss feasibility	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)	Avionics has approved plans to use Arduino. Finish AV bay(battery clips, boards, batteries). CAD DC Motor and motor retainer. Need to figure out how motor integrates with air break.
Print 3D components	Eric Falcone (RIT Student) Aaron Chan (RIT Student)
Figure out how to program the Arduino to accept PWM, and repeat the signal Detecting PWM Outputting PWM Running timed loop for PWM output Testing and Validation	Aaron Chan (RIT Student)	Test full airbrake deployment as well as black powder charge triggering.
Order boardboards(proton & arduino) motor gps Explore other options Reach out to Eggtimer for update on boards (2/18)	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)	Assuming new AV bay is approved, we should be able to order. Make order for protons before ordering the rest of avionics.New wiring diagram approved. Check is everything ordered, even protons.
Manufacture Laser cut plywood (1/8th) Set screw in square rod hole	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)
Assemble Glue together slide into rocket	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)

...

Versions Compared