Page Comparison

Team Members:

Jake Halpern
Alex Speyer
Nate Aquilio
Brahm Soltes
Tomasz Mazur
Kenny Kim
Alex Durand
Mike Elrod
Ryan Cross

...

Make Task List

...

Assign Roles

...

Make Timelines

...

FDR

...

Finalize CAD Drawings

...

Create Engineering Drawings

...

Make COTS Parts list + Order

...

Schedule

1/21-22 - FG Prep/Wind

1/29 - Nose Cone Layup

2/4-5 - CF Prep/Wind

2/12-26 - Aluminum Tip/Bulkheads/Thrust Plate/Centering Ring

3/5 - Fin Cut

3/5-26 - Post-processing/Integration

...

3 Fiber Glass Body Tubes

- - CAD
  - Engineering Drawings
  - Wind Tubes
  - Post-process
    - sanding, paint, holes
  - Test
  - Integrate into Rocket

...

Jake Halpern (RIT Student)

CAD/ Drawings - Michael Elrod (RIT Student)

...

1 Carbon Fiber Booster Tube

- - CAD
  - Engineering Drawings
  - Wind Tubes
  - Post-process
    - sanding, paint, holes
  - Test
  - Integrate into Rocket / coupler

...

Jake Halpern (RIT Student)

CAD/ Drawings - Michael Elrod (RIT Student)

...

4 Aluminum Bulkheads

- - Add holes to CAD
  - FEA
  - Drawing
  - Stock: Aluminum in basement
  - Tool Path
  - Tormach/cleanup
  - Secured by Rocket Epoxy

...

Mill

Nathan Aquilio (RIT Student)

CAD/ Drawings - Michael Elrod (RIT Student)

...

3 Plywood Centering Rings

- - CAD
  - Drawings
  - Stock: Plywood
  - Construct Router
  - Integrate using rocket epoxy to CF Tube

...

Alex Durand (RIT Student)

CAD/ Drawings - Michael Elrod (RIT Student)

...

Fins (including fin slots)

- - Calculations
  - CAD
  - Drawings
  - Stock (CF Sheets)
  - Manufacture on router (Ask Mike) (water jet?)
  - Integrate
    - 3D print internal jig
    - rocket epoxy fin to tube with jig in

...

Alex Speyer (RIT Student)

CAD/ Drawings - Michael Elrod (RIT Student)

...

Tip to tip layup (3-5 layers)

- - Lay-up 4 layers of CF rotating weave 45 deg. each layer
  - apply to rocket - overlap over edge of wing

...

Alex Speyer (RIT Student)

...

Aluminum Tip

- - CAD - need thread and washer to secure
  - tool path
  - Lathe
  - Cleanup
  - Integrate

...

Brahm Soltes (RIT Student)

...

FG Nose Cone

- - Calculations
  - CAD/Mold
  - Engineering Drawings
  - Mold
    - Stock MDF
    - Cut on the router
    - sand
    - gray
    - sand
  - Stock: Aluminum
  - Cut stock
  - layup
  - post-process
    - sanding