Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Overview

This process outlines how to setup PIN, PUK, and Management key on new Yubikey (initialize Yubikey).

Prerequisites


Process

New Setup

  1. Run the Yubikey Manager application and insert your key

  2. Click on Applications and then click on PIV


  3. Change PIN if Yubikey is fresh out of the box or it's been defaulted

    skip to step 4 (Enrollment) if Yubikey is already initialized

    1. Click on Configure PINs

    2. Click Change PIN and then check Use default (if it is default).
      Fill in the blanks.
      Finish with changing PIN by clicking on Change PIN
    3. Click on Change PUK and then check Use default (if it is default).
      Fill in the blanks.
      Finish with changing PUK by clicking on Change PUK

    4. Click on Change Management Key and then check Use default (if it is default).
      Fill in the blanks.
      Finish with changing the key by clicking on Finish
      1. You can check Protect with PIN to not need the Management Key for future
  • No labels