Rocket List - Triton

Please update these with more details of EVERYTHING that has to be done even the smallest thing add as a bullet to check off! Assign tasks and DRI's. The DRI's are responsible for completion not all of the hands-on work that comes from the team as a whole.

Structures

Nose Cone

Task	Assigned	Comments/Progress/Blockers
CAD	crb9080	Identify each component and confirm their accuracy Add material properties
CAD	Nathan Lloyd Donovan Barros (RIT Student)	Model the polycarbonate Ensure everything fits together
Order	Louis Fleisher (RIT Student)	Nose cone already ordered?
Assemble (epoxy to bulkhead)		What is the progress of this bulkhead it is attached to?

Airframe

Task	Assigned	Comments/Progress/Blockers
CAD	Nathan Lloyd
Order	Louis Fleisher (RIT Student)
Cut	Louis Fleisher (RIT Student) Nathan Lloyd

Bulkheads x 5 Aluminum

Task	Assigned	Comments/Progress/Blockers
CAD	Riley Quinn (RIT Student)	Camera bay Parachute 3 air brakes
FEA	Riley Quinn (RIT Student)
Order/find stock (plywood)	Nate Lloyd (RIT Student)	plywood is done at the moment, aluminium needs to be finished in CAD
Manufacture (router)
Assemble/ Epoxy to tube

Chute Bulkhead

Task	Assigned	Comments/Progress/Blockers
CAD	Riley Quinn (RIT Student) Nate Lloyd (RIT Student)	just need the eye bolt holes, and need to pick an eye bolt.
FEA of Bulkhead	Riley Quinn (RIT Student) Nate Lloyd (RIT Student)
FEA of Ibolts	Riley Quinn (RIT Student) Nate Lloyd (RIT Student)	checking McMaster-carr the one in fusion is probably too small and should be upped to maybe 1/2" diameter
Order/find stock (1/2 aluminum)	Louis Fleisher (RIT Student)	Thickness of 1/2 over kill? answer it is it has been reduced in the cad
Manufacture (CAM)
Manufacture (tormach)
Assemble/ Epoxy to tube

Camera Bulkhead

Task	Assigned	Comments/Progress/Blockers
CAD	Riley Quinn (RIT Student)
FEA of Bulkhead	Riley Quinn (RIT Student)
Order/find stock (1/2 aluminum)	Louis Fleisher (RIT Student)	Thickness of 1/2 over kill?
Manufacture (CAM)	Riley Quinn (RIT Student)
Manufacture (tormach)	Riley Quinn (RIT Student)
Mount Camera to bulkhead	Riley Quinn (RIT Student)
Assemble/ Epoxy to tube	Riley Quinn (RIT Student)

Fins

Task	Assigned	Comments/Progress/Blockers
CAD
Calcs (fin flutter)	Louis Fleisher (RIT Student)	double check these calcs
Order/find stock (Fiber Glass)	Louis Fleisher (RIT Student)	Get quote from Send cut send instead of make in house
Manufacture (CAM)	Nate Lloyd (RIT Student)	Send cut send instead of make in house
Manufacture (crushinator or router)	Nate Lloyd (RIT Student)	making in house
Manufacture slots in airframe tube
Jig to make slots in airframe
Epoxy fins into slots

Motor (thrust plate/motor retainer/motor tube)

Task	Assigned	Comments/Progress/Blockers
CAD Put into Assembly	Nate Lloyd (RIT Student)
Calcs FEA on PLates	Nate Lloyd (RIT Student)
Order/find stock (Aluminum) Stock Hardware motor	Nate Lloyd (RIT Student)
Manufacture Thrust plate Motor retainer Motor tube	Nate Lloyd (RIT Student)
Assembly Bolt together Order TBD	Nate Lloyd (RIT Student)

Airbrakes

Task	Assigned	Comments/Progress/Blockers
CAD/Assembly Pick L brakets and order/test	Jonah Gimmi (RIT Student)
FEA of ASSy	Jonah Gimmi (RIT Student)
FEA of joints	Jonah Gimmi (RIT Student)
Motor Selection from Calcs	Jonah Gimmi (RIT Student) Riley Quinn (RIT Student)
Snatch force calculation	Jonah Gimmi (RIT Student) Riley Quinn (RIT Student)
Airbrake equivalent of chute math	Jonah Gimmi (RIT Student) Riley Quinn (RIT Student)
Order/Find Materials BOM	Jonah Gimmi (RIT Student)	Ready to order L brackets (x10)
Manufacture Stock Rods/long screw Aluminum Blue tube Hardware
Assemble Integreate with Rocket Internal assembly Add action items as CAD is finished

Engineering Camera

Task	Assigned	Comments/Progress/Blockers
CAD/integrate with Rocket assembly	crb9080
Order Camera Electronics ect from BOM	crb9080	Remember to order press fittings
Manufacture Create Jig to make slots/hole in airframe Cut slots in airframe 3D print Jig Hole in air frame for screw switch 3D print casing	crb9080 Donovan Barros (RIT Student)	3D print the mounts before cutting the tube to ensure fit
Assemble Integrate with Rods Epoxy to airframe Wire/connect	crb9080 Donovan Barros (RIT Student)

Scenic Camera

Task	Assigned	Comments/Progress/Blockers
CAD/integrate with Rocket assembly Bolt to make camera removable idea	Donovan Barros (RIT Student) Riley Quinn (RIT Student)
Order Camera Electronics ect from BOM	Donovan Barros (RIT Student)
Manufacture Aluminum stock? Steel Stock?	Donovan Barros (RIT Student)	Add what has to happen to be manufactured don't have in notes
Assemble Bolts Integration to airframe TBD	Donovan Barros (RIT Student)

Avionics

Task	Assigned	Comments/Progress/Blockers
CAD/integrate with Rocket assembly Component selection Wire diagram New wire diagram for the Arduino Meet with avionics to discuss feasibility	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)	Avionics has approved plans to use Arduino.
Print 3D components	Eric Falcone (RIT Student) Aaron Chan (RIT Student)
Figure out how to program the Arduino to accept PWM, and repeat the signal Detecting PWM Outputting PWM Running timed loop for PWM output Testing and Validation	Aaron Chan (RIT Student)
Order boards(proton & arduino) motor gps Explore other options Reach out to Eggtimer for update on boards (2/18)	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)	New wiring diagram approved.
Manufacture Laser cut plywood (1/8th) Set screw in square rod hole	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)
Assemble Glue together slide into rocket	Louis Fleisher (RIT Student) Eric Falcone (RIT Student) Aaron Chan (RIT Student)