You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 36
Next »
Team Members:
- Jake Halpern
- Alex Speyer
- Nate Aquilio
- Brahm Soltes
- Tomasz Mazur
- Kenny Kim
- Alex Durand
- Mike Elrod
- Ryan Cross
Action Items | Due Date | Assigned Persons |
---|
| 1/12/22 | Jake/Alex/Nate/Grace |
| 1/15/22 |
|
| 1/15/22 | Jake/Alex |
| 1/22/22 | Divide work? |
| 1/19/22 | Mike? |
- Create Engineering Drawings
| 1/22/22 | Mike? |
- Make COTS Parts list + Order
| 1/22/22 | Jake/Alex/Nate |
Schedule
1/21-22 - FG Prep/Wind
1/29 - Nose Cone Layup
2/4-5 - CF Prep/Wind
2/12-26 - Aluminum Tip/Bulkheads/Thrust Plate/Centering Ring
3/5 - Fin Cut
3/5-26 - Post-processing/Integration
Manufacturing Tasks | Process | Assigned Persons | Priority |
---|
- CAD
- Engineering Drawings
- Wind Tubes
- Post-process
- Test
- Integrate into Rocket
| Winding | | 1 |
- 1 Carbon Fiber Booster Tube
- CAD
- Engineering Drawings
- Wind Tubes
- Post-process
- Test
- Integrate into Rocket / coupler
| Winding | | 2 |
- Add holes to CAD
- FEA
- Drawing
- Stock: Aluminum in basement
- Tool Path
- Tormach/cleanup
- Secured by Rocket Epoxy
| Mill | | 4 |
- 3 Plywood Centering Rings
- CAD
- Drawings
- Stock: Plywood
- Construct Router
- Integrate using rocket epoxy to CF Tube
| Mill | | 7 |
- Fins (including fin slots)
- Calculations
- CAD
- Drawings
- Stock (CF Sheets)
- Manufacture on router (Ask Mike) (water jet?)
- Integrate
- 3D print internal jig
- rocket epoxy fin to tube with jig in
| Mill | | 6 |
- Tip to tip layup (3-5 layers)
- Lay-up 4 layers of CF rotating weave 45 deg. each layer
- apply to rocket - overlap over edge of wing
|
| | 6 |
- CAD - need thread and washer to secure
- tool path
- Lathe
- Cleanup
- Integrate
| Lathe | | 3 |
- Calculations
- CAD/Mold
- Engineering Drawings
- Mold
- Stock MDF
- Cut on the router
- sand
- gray
- sand
- Stock: Aluminum
- Cut stock
- layup
- post-process
| FG Lay-up | | 3 |
- CAD
- Buy
- Integrate
- Connect to CF tubes with Nuts and Bolts
| Buy | | 9 |
- CAD
- send to Matt
- Get from Matt
- Bolted to Aft bulkhead
| Matt | | 8 |
- CAD
- Drawing
- Stock - Aluminum
- tool path
- tormach/ cleanup
- rocket epoxy to CF tube
| Mill | | 5 |
Parts to Buy:
- 3 FG Coupler Tubes
- Rail Guides
- Motor
- Motor Casing
- FG Motor Tube
- Resin
- Hardener
- 5 min Epoxy
- Rocket Epoxy x2
- Fiberglass cloth
- Carbon Fiber Sheets
- Long Threaded Rod
- Washers
- Nuts
- Bolts
- Eyebolts
- Sanding materials
- Paint
Fiber Glass Body Tube Winding:
Setup -
Winding -
Removal -