This Confluence space has been migrated and is no longer current. The content on this space will no longer be accessible after July 1, 2026.
30pin Header Table
30 Pin Module connector chart
NOICE! When designing or updating a module with the intention of using a BLTPLANE make sure NOT to use GPIO 7(was on pin 30).
NOICE! ADDR 0 (Pin 17) has been changed to Clock Sync (Pin 17).
Description | PIN# | Description | |
Battery Voltage | 1 | 2 | Battery Voltage |
GND | 3 | 4 | GND |
5v | 5 | 6 | 5v |
GND | 7 | 8 | GND |
3v3 | 9 | 10 | 3v3 |
GND | 11 | 12 | GND |
TX+ | 13 | 14 | RX+ |
TX- | 15 | 16 | RX- |
Clock Sync | 17 | 18 | ADDR1 |
ADDR 2 | 19 | 20 | ADDR 3 |
Power LED | 21 | 22 | Status LED |
GPIO 0 | 23 | 24 | GPIO 1 |
GPIO 2 | 25 | 26 | GPIO 3 |
GPIO 4 | 27 | 28 | GPIO 5 |
GPIO 6 | 29 | 30 | GND |