Hey guys! This is what we discussed last week but it is not everything that will come up. Please add and check off tasks! Thanks! Wynter Brigitta-Maita (RIT Alumni)

Logo	Assigned
	Sierra Dacey (RIT Student)
	Isaac Chin
	Cornelius O'Leary (RIT Student)

Structures

Nose Cone

Task	Assigned	Comments/Progress/Blockers
Design
CAD
Order		hardware?
Manufacture
Cut off Bottom portion of Nose Cone
Assembly
Friction fit + retention screws

Airframe

Task	Assigned	Comments/Progress/Blockers
Design
Length Cals from OR
Put all CAD components into assy for rocket
CAD
Jig for Slot cutting and Ave bay holes
Order Tubes		hardware?
Manufacture
Holes for Ave Bay (laser cut/Drill?)	Bo Golden	probably drill
Holes for chutes	Bo Golden
Slot for Fins(laser cut/dremmel?)	Bo Golden
Assembly
Assembly order of everything then slide in/epoxy

Bulkheads x5

Task	Assigned	Comments/Progress/Blockers
Design
Snatch Force Calc
CAD	Joshua Rosenberg
FEA?	Leo Zheng	may not be needed but could be fun (bolts, motor attachments, blue tube)
Order/find 1/2 plywood		hardware?
Manufacture
CAM
Cut on CNC Router
Assembly
Epoxy to tube
Thread Ibolts

Centering Rings x4

Task	Assigned	Comments/Progress/Blockers
Design
CAD
Order/find stock		1/8 in ply
Manufacture
CAM	Bo, Brooke, Joshua, Andrew L	Completed via laser cutter
Run on Router	Bo, Brooke, Joshua, Andrew L	Completed via laser cutter
Assembly
ORDER of assembly
Epoxy/rods?

Smaller Centering Ring x2 (I forgot what you guys actually called this lol)

Task	Assigned	Comments/Progress/Blockers
Design
CAD
Order/find stock		1/8 in ply
Manufacture
CAM	Bo, Brooke, Joshua, Andrew L	Completed through laser cutter
Run on Router	Bo, Brooke, Joshua, Andrew L	Completed through laser cutter
Assembly
ORDER of assembly
Epoxy/rods?

Metal Centering Ring x1

Task	Assigned	Comments/Progress/Blockers
Design
CAD		Blocked due to unknown number of Ibolts
FEA with Ibolt		Decide the number of Ibolts
Order/find stock		what is the stock? albumin thickness?hardware?
Manufacture
CAM
Tormach or Protrak		Can be either protrak or tormach, tormach might be easier
Assembly
ORDER of assembly
Loctite Ibolts
epoxy ibolt to plate
epoxy to motor tube
epoxy to airframe

Fins

Task	Assigned	Comments/Progress/Blockers
Design
CAD
Fin Flutter Calcs
Order/find Fiber Glass stock		Stock changed to carbon fiber Cutting to be done 04/04
Spacer Jig for epoxy
Ensure slots in Frame are right size and position
Manufacture
CAM	Bo, Sierra, Joshua, Andrew S
Run on Crushinator	Bo, Sierra, Joshua, Andrew S	GLOVES
Assembly
ORDER of assembly
Epoxy
Slide into airframe slots

Payload Thrust Plate x1

Task	Assigned	Comments/Progress/Blockers
Design
CAD	Cornelius O'Leary (RIT Student)
FEA	Cornelius O'Leary (RIT Student)
Order/find stock		Confirm al 1/2in? hardware?
Manufacture
CAM	Cornelius O'Leary (RIT Student)
Tormach
Assembly
ORDER of assembly
Thread/mount

Motor Retainer x2

Task	Assigned	Comments/Progress/Blockers
Design
CAD
FEA on threaded rods...
Order/find stock		confirm al 1/2in? hardware?
Manufacture
CAM
Tormach
Assembly
ORDER of aassy
Add other bullets please

Motor Tube x2

Task	Assigned	Comments/Progress/Blockers
Design
CAD Make Fin spacers	Bo, Eve
Black powder calc
Order tube		hardware?
Manufacture
Cut Tube to length	Bo, Andrew L, Andrew S
Assembly
ORDER of assembly	Bo
Epoxy centering rings
epoxy cuppler tube
Fin slots/spacer for alignment		make spacers
Slide into Tube

Bottom Stage...? please fill out

Task	Assigned	Comments/Progress/Blockers
Design
Standard L2 bottom centering rings epoxyed to motor tube Top centering ring is metal (see section)	Team
Standard motor retainer/thrustplate setup	Cornelius O'Leary (RIT Student)

Manufacture
Cut airframe Cut motor tube Cut fin slots	Bo, Andrew L

Assembly
Epoxy centering rings to motor tube as specified in OR epoxy motor mount setup into airframe epoxy thrust plate to bottom of the stage Let dry!!!
Epoxy in fins

Avionics

Av bay

Task	Assigned	Comments/Progress/Blockers
Design
CAD		hardware?
Wire placement/hole in other parts for wirers	Sierra Dacey (RIT Student)	super imporant to get ahead of this before manufacturing starts
Order electronics Find Wood stock Find eggtimer explore other options for electronics if low inventory order new 7.4 V (2S) Lipo batteries x6	Andrew Linn (RIT Student)
Manufacture
3D print Av caps	Eve
Laser cut Wood
Assembly
glue 3d printed and wood parts together	Sierra Dacey (RIT Student)
Thread bolts
Assemble flight computers

Camera

Task	Assigned	Comments/Progress/Blockers
Design		Camera most likely 86'ed, unless cheap alternative found or team pitches in
CAD/Assembly
Pick Camera
Order electronics
Manufacture
3D print case
Assembly
Epoxy to body tube

Imagine RIT Poster

Task	Assigned	Comments/Progress/Blocker
Create Poster (April 13th)	Sierra Dacey (RIT Student)
Finalize Logo	Sierra Dacey (RIT Student)

Browser not supported