Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 22
Next »
Week 11
Assignee / Action Item / Description | Date Assigned: | Complete By: | Completion Date: | Comments: | Resolution |
---|
- Everyone: Put your OpenRocket model in your respective chat, along with a quick synopsis of what was good/bad from the PDR.
| 10/25/2020 | 10/31/2020 |
|
|
|
- Modeling/Simulation: Take in everyone's OpenRocket models and begin working on combining them into one cohesive design that uses the best of everyone's.
| 10/25/2020 | 10/31/2020 |
|
|
|
- Avionics: Read through all the links posted above to get familiar with our COTS avionics systems.
| 10/25/2020 | 10/31/2020 |
|
|
|
| 10/25/2020 | 10/31/2020 |
|
|
|
- Website/Media Designer: Message Joy Sangsrichan over slack and ask her about getting access to the website.
| 10/25/2020 | 10/31/2020 |
|
|
|
- Presentation Designer: Nothing this week!
| 10/25/2020 | 10/31/2020 |
|
|
|
- BOM Maker: Create a BOM spreadsheet and add the body tubes to it. (you need cost, number of items, name, and link for each item)
| 10/25/2020 | 10/31/2020 |
|
|
|
- Numbers Person: Read through this link to learn about Thrust to Weight Ratios.
| 10/25/2020 | 10/31/2020 |
|
|
|
Week 12 |
Assignee / Action Item / Description | Date Assigned: | Complete By: | Completion Date: | Comments: | Resolution |
---|
Everyone: - Sign in to the wiki using your RIT email.
| 11/3/2020 | 11/7/2020 |
|
|
|
Modeling/Simulation: - Produce a finalized OpenRocket model, submit to James ASAP, goal is to have model reviewed and finalized by Saturday.
| 11/3/2020 | 11/7/2020 |
|
|
|
Avionics: - Decide whether or not doing the collaborative board with the Avionics team is worth pursuing (highly recommend it!)
| 11/3/2020 | 11/7/2020 |
|
|
|
CAD Designer: - 1. Design the body tube in this link.
- 2. Design 1/4" bulkheads.
- 3. Design coupler tubes from this link.
| 11/3/2020 | 11/7/2020 |
|
|
|
Website/Media Designer: - Add current team member list to website page.
| 11/3/2020 | 11/7/2020 |
|
|
|
Presentation Designer: - Create skeleton CDR slides (literally just copying PDR over and renaming to CDR will work for now)
| 11/3/2020 | 11/7/2020 |
|
|
|
BOM Maker: - Add 1 roll of Hatchbox PLA 3d printer filament to BOM (look up on amazon). Specify amount to be 0.5kg, so total cost will be half the cost of one roll.
| 11/3/2020 | 11/7/2020 |
|
|
|
Numbers Person: - Read through this link to understand calculations for parachutes.
| 11/3/2020 | 11/7/2020 |
|
|
|
Week 13 |
Assignee / Action Item / Description | Date Assigned: | Complete By: | Completion Date: | Comments: | Resolution |
---|
Everyone: - Figure out what part of the rocket you'll present for the CDR.
| 11/7/2020 | 11/14/2020 |
|
|
|
Modeling/Simulation: - Run motor simulation for final OpenRocket model(after parachute calculation is made and parachutes are updated), and put in CDR
| 11/7/2020 | 11/14/2020 |
|
|
|
Avionics: - Generate slides for the COTS avionics system
- Overview of COTS avionics w/ James
- (If pursuing) decide what the custom avionics board should be capable of.
| 11/7/2020 | 11/14/2020 |
|
|
|
CAD Designer: - Create entire CAD model for rocket, driven by OpenRocket model
| 11/7/2020 | 11/14/2020 |
|
|
|
Website/Media Designer: - Add team mission to website
| 11/7/2020 | 11/14/2020 |
|
|
|
Presentation Designer: - Create blank CDR slides for Thrust to Weight Ratio, OpenRocket Model, Fin Flutter calculations, CAD model, Parachute calculations, and anything else not listed that was in the PDR
| 11/7/2020 | 11/14/2020 |
|
|
|
BOM Maker: - Add parachute given by Numbers Person to BOM
- Add coupler tubes to BOM
- Add rocket motor to BOM
| 11/7/2020 | 11/14/2020 |
|
|
|
Numbers Person: - Calculate Thrust to Weight ratio for the rocket and add to the CDR
- Calculate ideal parachute diameters, use this number to drive our parachute choice (from this website), and add all that info to the CDR
- Give parachute choice to BOM Maker to add
| 11/7/2020 | 11/14/2020 |
|
|
|