You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 6
Next »
Please update these with more details of EVERYTHING that has to be done even the smallest thing add as a bullet to check off! Assign tasks and DRI's. The DRI's are responsible for completion not all of the hands-on work that comes from the team as a whole.
Structures
Nose Cone
| Task | Assigned | Comments/Progress/Blockers |
|---|
| | - Identify each component and confirm their accuracy
- Add material properties
|
| | - Model the polycarbonate
- Ensure everything fits together
|
| |
|
- Assemble (epoxy to bulkhead)
|
| What is the progress of this bulkhead it is attached to? |
Airframe
| Task | Assigned | Comments/Progress/Blockers |
|---|
| Nathan Lloyd |
|
| |
|
| |
|
Bulkheads x 4 Plywood
| Task | Assigned | Comments/Progress/Blockers |
|---|
|
|
|
|
|
|
- Order/find stock (plywood)
|
|
|
|
|
|
|
|
|
Chute Bulkhead
| Task | Assigned | Comments/Progress/Blockers |
|---|
|
|
|
|
|
|
|
|
|
- Order/find stock (1/2 aluminum)
| | Thickness of 1/2 over kill? |
|
|
|
|
|
|
|
|
|
Camera Bulkhead
| Task | Assigned | Comments/Progress/Blockers |
|---|
| |
|
| |
|
- Order/find stock (1/2 aluminum)
| | Thickness of 1/2 over kill? |
| |
|
| |
|
| |
|
| |
|
Fins
| Task | Assigned | Comments/Progress/Blockers |
|---|
|
|
|
|
| double check these calcs |
- Order/find stock (Fiber Glass)
| | Get quote from Send cut send instead of make in house |
|
| Send cut send instead of make in house |
- Manufacture (crushinator or router)
|
| Send cut send instead of make in house |
- Manufacture slots in airframe tube
|
|
|
- Jig to make slots in airframe
|
|
|
|
|
|
Motor (thrust plate/motor retainer/motor tube)
| Task | Assigned | Comments/Progress/Blockers |
|---|
|
|
|
|
|
|
- Order/find stock (Aluminum)
- Stock
- Hardware
- motor
|
|
|
- Manufacture
- Thrust plate
- Motor retainer
- Motor tube
|
|
|
- Assembly
- Bolt together
- Order TBD
|
|
|
Airbrakes
| Task | Assigned | Comments/Progress/Blockers |
|---|
- CAD/Assembly
- Pick L brakets and order/test
| |
|
| |
|
| |
|
- Motor Selection from Calcs
| |
|
| |
|
- Airbrake equivalent of chute math
| |
|
| | Ready to order L brackets (x10) |
- Manufacture
- Stock
- Rods/long screw
- Aluminum
- Blue tube
- Hardware
|
|
|
- Assemble
- Integreate with Rocket
- Internal assembly
- Add action items as CAD is finished
|
|
|
Engineering Camera
| Task | Assigned | Comments/Progress/Blockers |
|---|
- CAD/integrate with Rocket assembly
| |
|
- Order
- Camera
- Electronics
- ect from BOM
| | Remember to order press fittings |
- Manufacture
- Create Jig to make slots/hole in airframe
- Cut slots in airframe
- 3D print Jig
- Hole in air frame for screw switch
- 3D print casing
-
| | 3D print the mounts before cutting the tube to ensure fit |
- Assemble
- Integrate with Rods
- Epoxy to airframe
- Wire/connect
| |
|
Scenic Camera
| Task | Assigned | Comments/Progress/Blockers |
|---|
- CAD/integrate with Rocket assembly
- Bolt to make camera removable idea
| |
|
- Order
- Camera
- Electronics
- ect from BOM
| |
|
- Manufacture
- Aluminum stock?
- Steel Stock?
| | Add what has to happen to be manufactured don't have in notes |
- Assemble
- Bolts
- Integration to airframe TBD
| |
|
Avionics
| Task | Assigned | Comments/Progress/Blockers |
|---|
- CAD/integrate with Rocket assembly
- Component selection
- Wire diagram
| |
|
- Order
- board
- motor
- gps
- Explore other options
| | BLOCKER due to low inventory explore other options Explore new flight computer options - must support PWM
- And altitude/apogee detection
|
- Manufacture
- Laser cut plywood (1/8th)
- Set screw in square rod hole
| |
|
- Assemble
- Glue together
- slide into rocket
| |
|