You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 24
Next »
Overview
This module interfaces with sensors and provides the data to other modules on the Back Plane.
Block Diagram
What to Measure
Acceleration +X
- High G (0->30)
- Low G (0-16)
Altitude
- Barometric Pressure
- Temperature
Rotation abt X
Memory
Status LED (RGB)
Remote Temperature Sensor
Current Module Status as of 10/21/22:
Item | Notes | Status: |
---|
Update/Create Block Diagram | Update/Create before CDR | - Updated Block Diagram of Main Sensor Module
- Create Block Diagram for PROMPT
- Make a more precise block diagram
|
Sensor Board Component Selection | Select ICs and other secondary components. | - Power ripple rejection circuitry
- Quantify voltage ripple limits of sensors
- Find ripple output from power board
- Secondary Components Selected
- Identify all required secondaries & passives
- Accelerometer
- Altimeter
- Flash
- Microcontroller
- Magnetometer
- Temperature Sensor
- LEDs
- Ethernet
- USB
- Identify shared secondary components
- Identify the full list of passives used (Basic Parts)
|
PROMPT Component Selection | Select ICs and other secondary components. | - Finalize IC selection
- Pressure
- Temperature
- LEDs
- Microcontroller
- Linear Regulator
- Secondary Component Selection
- Use as many of the same as Sensor Board as possible
|
Sensor Board Altium Components Created | Create or find Altium components for Sensor Board. | - Passive Board Components Created
- ICs Created
- MS5607
- BMP390
- ADXL375
- L3GD20H
- LIS3MDL
- MMA8451Q
- TMP117
- STM32F446RET6
- W25Q128JVSIQ
- LEDs
|
PROMPT Altium Components Created | Create or find Altium components for PROMPT. | - Passive Board Components Created
- ICs Created
|
Sensor Board Schematic Capture |
|
|
PROMT Schematic Capture |
|
|
|
|
|
Links