...
brayden doesnt have access yet lol, but he found some but also theres alot so yeah
big led??
no big led just regular white led that draws 100mA
switch
https://www.diodes.com/assets/Datasheets/DMN2320UFB4.pdf (1A rated lil box)
9/16 progress: selected the xaio sense as the microcontroller and will not be using a seprate imu.
...
2mA gpio current
2ish volt gpio output?
Action items going forewardforward
design camera-board-batteries interfacing/physical design
test the run cam with led for exposure change
power calcs/timeline, test current draw with 5V
get parts in altium
select transistors for switching (probably fets) that WORK and check efficiency ect
triple check if the xaio needs regulation(it doesn not, its built in)
later design voltage conversion
Power drain estimates
with 1600mAh battery
pasive passive standard mode 160hrs 10mA draw
...
overestimate powering cam+led (600mA+100mA) 2.3hrs
with 3200mAh we could almost completely ignore putting the xiao on sleep mode, power consumption would be a very minimal issue