...
- Holds sleds in place (small indentations for sled channels)
- Clamped to Bottom Bulkhead with Nuts on threaded rods
Bottom bulkhead (Structural)
- removeable w/ square O-ring slot except the O-ring is a quattro
- 0.75" thick bulkhead
- LUBE
- LOTS AND LOTS OF LUBE
- AND EVEN MORE LUBE
- screw holes on top of quattro ring
- one piece with eyebolt (4th axis baybeee!)
- Look for a normal one, if Jim wants to be bold he can do that on his own time
- Threaded rods run through, gets secured with nuts
- Screws will enter the bulkhead from outside the rocket
...