Versions Compared

Old Version 77

changes.mady.by.user Wynter M. Petersen (RIT Student)

Saved on

compared with

New Version 78

changes.mady.by.user Wynter M. Petersen (RIT Student)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Task

Assigned 

Comments/Progress/Blockers

Design

  •  CAD



  •  Order


hardware?

Manufacture



  •  Cut off Bottom portion of Nose Cone


Assembly 



  •  Friction fit with airframe and tooth picks+ retention screws



Airframe

Task

Assigned 

Comments/Progress/Blockers

Design

  •  Length  Cals from OR



  •  Put all CAD components into assy for rocket


  •  CAD



  •  Jig for Slot cutting and Ave bay holes


  •  Order Tubes

hardware?
Manufacture

  •  Holes for Ave Bay (laser cut/Drill?)
Bo Goldenprobably drill
  •  Holes for chutes
Bo Golden
  •  Slot for Fins(laser cut/dremmel?)
Bo Golden
Assembly

  •  Assembly order of everything then slide in/epoxy


...

Task

Assigned 

Comments/Progress/Blockers

Design

  •  CAD



  •  Order/find stock
what is the stock?hardware?
1/8 in ply
Manufacture

  •  CAM
Bo, Brooke, Joshua, Andrew L

Completed via laser cutter


  •  Run on Router
Assembly

  •  ORDER of assembly


  •  Epoxy/rods?


Smaller Centering Ring x2 (I forgot what you guys actually called this lol)

Task

Assigned 

Comments/Progress/Blockers

Design

  •  CAD



  •  Order/find stock
what is the stock?hardware?

1/8 in ply
Manufacture

  •  CAM

Bo, Brooke, Joshua, Andrew L		Completed through laser cutter

  •  Run on Router
Assembly

  •  ORDER of assembly


  •  Epoxy/rods?


Metal Centering Ring x1

Task

Assigned 

Comments/Progress/Blockers

Design

  •  CAD


Blocked due to unknown number of Ibolts
  •  FEA with Ibolt

Decide the number of Ibolts
  •  Order/find stock

what is the stock? albumin thickness?hardware?
Manufacture

  •  CAM


  •  Tormach or Protrak

Can be either protrak or tormach, tormach might be easier
Assembly

  •  ORDER of assembly


  •  Loctite Ibolts


  •  epoxy ibolt to plate


  •  epoxy to motor tube


  •  epoxy to airframe



Fins

Task

Assigned 

Comments/Progress/Blockers

Design

  •  CAD



  •  Fin Flutter Calcs


  •  Order/find Fiber Glass stock
what is the stock? hardware?

Stock changed to carbon fiber

Cutting to be done 04/04

  •  Spacer Jig for epoxy


  •  Ensure slots in Frame are right size and position


Manufacture

  •  CAM

Bo, Sierra, Joshua
  •  Run on Crushinator
GLOVES
Assembly

  •  ORDER of assembly


  •  Epoxy


  •  Slide into airframe slots


Payload Thrust Plate x1

Task

Assigned 

Comments/Progress/Blockers

Design

  •  CAD

Cornelius O'Leary (RIT Student) 


  •  FEA

Cornelius O'Leary (RIT Student) 


  •  Order/find stock

Confirm al 1/2in? hardware?
Manufacture

  •  CAM

Cornelius O'Leary (RIT Student)


  •  Tormach


Assembly

  •  ORDER of assembly


  •  Thread/mount


...

Task

Assigned 

Comments/Progress/Blockers

Design

  •  CAD
  •  Make Fin spacers 

Bo, Eve 


  •  Black powder calc


  •  Order tube

hardware?
Manufacture

  •  Cut Tube to length
Bo, Andrew L, Andrew S
Assembly

  •  ORDER of assembly
Bo
  •  Epoxy centering rings


  •  epoxy cuppler tube


  •  Fin slots/spacer for alignment

make spacers
  •  Slide into Tube (smile)


...

Task

Assigned 

Comments/Progress/Blockers

Design

  •  Standard L2 bottom
  • centering rings epoxyed to motor tube
  • Top centering ring is metal (see section)

Team


  •  Standard motor retainer/thrustplate setup
Cornelius O'Leary (RIT Student) 



Manufacture

  •  Cut airframe
  •  Cut motor tube
  •  Cut fin slots
Bo, Andrew L



Assembly

  •  Epoxy centering rings to motor tube as specified in OR
  •  epoxy motor mount setup into airframe 
  •  epoxy thrust plate to bottom of the stage
  •  Let dry!!!


  •  Epoxy in fins 


...

Task

Assigned 

Comments/Progress/Blockers

Design

  •  CAD


hardware?
  •  Wire placement/hole in other parts for wirers
Sierra Dacey (RIT Student) super imporant to get ahead of this before manufacturing starts
  •  Order electronics
  •  Find Wood stock 
  •  Find eggtimer
  •  explore other options for electronics if low inventory
  •  order new 7.4 V (2S) Lipo batteries x6

Andrew Linn (RIT Student) 


Manufacture

  •  3D print Av caps
  •  
Eve 
  •  Laser cut Wood


Assembly

  •  glue 3d printed and wood parts together

Sierra Dacey (RIT Student) 


  •  Thread bolts


  •  Assemble flight computers

Sierra Dacey (RIT Student) 


Camera

Task

Assigned 

Comments/Progress/Blockers

Design

Camera most likely 86'ed, unless cheap alternative found or team pitches in


  •  CAD/Assembly


  •  Pick Camera

  •  Order electronics

Manufacture
  •  3D print case

Assembly
  •  Epoxy to body tube


Imagine RIT Poster

TaskAssignedComments/Progress/Blocker
Create Poster (April 13th)




...