Autopilot Module | Ben Hyman (RIT Student) | Updates: - Confirmed Vocore pin state is input
- Schematic 99% done
- Came up with a few more changes today.
- Have LED1 connect to Vocore power out to confirm power on
- 220u brownout capacitors
- Ready to be reviewed
- Layout ~80% done
- All components are placed and most routed. Mainly just need to route backplane connector
TODOs: - Schematic:
- Add brownout capacitors
- Connect vocore 3v3 out to backplane LED1 instead of its own LED as it is currently
- Layout:
- Finish routing
- Run DRC and deal with errors
|