...
- Donovan Barros (RIT Student) Shrink central connecting bar to accommodate backplane modules
- Donovan Barros (RIT Student) Add DE-9 holes for both downward-facing connectors
- Donovan Barros (RIT Student) Expand DE-9 holes to accommodate square-ish connector
- Donovan Barros (RIT Student) Replace BRB battery instead of sticking it on the bottom Check DE-9 connector dimensions to make sure they fit in the holes (these are in)
- Donovan Barros (RIT Student) Change the dimensions of the BRB's battery inside the BRB model to match the larger battery
- Donovan Barros (RIT Student) Use shorter version of last year's battery holders (look cleaner)
- Yevgeniy Gorbachev (RIT Student) Saner battery layout
- Donovan Barros (RIT Student) Move RRC3s closer
...
- Donovan Barros (RIT Student) Design Finger Tech screw switch bracket (these are in)
- Donovan Barros (RIT Student) Design Big Red Bee bracket
- Donovan Barros (RIT Student) Hole drilling jig
- Donovan Barros (RIT Student) Integration plan
- Yevgeniy Gorbachev (RIT Student) Figure out which battery for backplane
- Yevgeniy Gorbachev (RIT Student) Lay out radio module antennas
- Yevgeniy Gorbachev (RIT Student) Update power module with corrected version
...
- Backplane module cutouts
- Holes and fasteners
Manufacture
Prerequisites
- Router bits
- Superglue
- Donovan Barros (RIT Student) router training (probably with Jim)
Manufacturing (Test)
- Donovan Barros (RIT Student) Laser cut end caps
- Donovan Barros (RIT Student) Laser cut connecting bars
- Donovan Barros (RIT Student) Print antenna bracket
- Donovan Barros (RIT Student) Print BRB bracket
- Donovan Barros (RIT Student) Print battery holders (2x small / 1x large)
Manufacturing (Final)
- Donovan Barros (RIT Student) Machine upper end cap
- Donovan Barros (RIT Student) Machine lower end cap
- Donovan Barros (RIT Student) Machine connecting bar
- Donovan Barros (RIT Student) Machine connecting bar
- Donovan Barros (RIT Student) Machine center bar
- Donovan Barros (RIT Student) Laser cut sleds
Assembly
- Donovan Barros (RIT Student) Glue together components
- Donovan Barros (RIT Student) Drill holes in nosecone
- Donovan Barros (RIT Student) Glue in key