...
| Item | Who | Notes |
|---|---|---|
| Status Updates | ||
| Sensor Module Rev. 2 | Louis Fleisher (RIT Student) | |
| Power Module Rev. 2 | ||
| Moar Backplane Form Factors | Currently we only have one form factor for the avionics bay to support 4 modules. We would like to look into increasing our support for different structures.
| |
Liquid Prop Test Stand | I straight up don't know this. Probably something about not making too many loud noises and making sure people don't get hurt. | |
| More Mikroe Standard Breakouts | To help with testing firmware and reduce errors in hardware setup, the team is trying to utilize Mikroe breakouts. Currently, need new breakouts for the MS5611 and W25N chip. | |
| Flipping Dev Module Connector | Due to lack of communication the pin out on the dev module is flipped  Find a solution to fix this. | |
| Sensor Module Software | Most of the sensor drivers are complete. New drivers need to be written for sensors used in Rev 2. Application level logic also needs to be written to support taking data, and sending it over Ethernet and storing in flash memory. | |
| Radio Module Software | GPS driver complete. Radio transceiver driver being tested. | |
| Power Module Software | ||
| RocketPy Refinements |
...