...
- Donovan Barros (RIT Student) Shrink central connecting bar to accommodate backplane modules
- Donovan Barros (RIT Student) Add DE-9 holes for both downward-facing connectors
- Donovan Barros (RIT Student) Expand DE-9 holes to accommodate square-ish connector
- Donovan Barros (RIT Student) Check DE-9 connector dimensions to make sure they fit in the holes
- Donovan Barros (RIT Student) Update cut radii
- Donovan Barros (RIT Student) Change the dimensions of the BRB's battery inside the BRB model to match the larger battery
- Donovan Barros (RIT Student) Use shorter version of last year's battery holders (look cleaner)
- Yevgeniy Gorbachev (RIT Student) Saner battery layout
- Donovan Barros (RIT Student) Move RRC3s closer
- Donovan Barros (RIT Student) Resolve switch bar interference - move sleds around if necessary
- Donovan Barros (RIT Student) Move backplane up so the PEM nut doesn't stick out of the bay
- Donovan Barros (RIT Student) Correct sled height/width if slots moved
- Donovan Barros (RIT Student) Adjust slot corner radius to match tool (or we could just file it?)
- Donovan Barros (RIT Student) Add 1/8" charge lines to bulkhead CAD
- Donovan Barros (RIT Student) Add appropriately sized keep-out blocks to Fingertech screw switches
- Donovan Barros (RIT Student) Copy the RRC3 into the IREC 2023 Fusion project so we modify our copy instead of the library copy
- Donovan Barros (RIT Student) Add appropriately sized keep-out blocks to RRC3 terminal blocks
- Donovan Barros (RIT Student) Add appropriately sized keep-out blocks to D-sub breakouts
- Donovan Barros (RIT Student) Correct DE-9 breakout model
- Donovan Barros (RIT Student) Correct strain relief spacing
- Donovan Barros (RIT Student) Correct sled holes
...
- Donovan Barros (RIT Student) Machine upper end cap
- Donovan Barros (RIT Student) Machine lower end cap
- Donovan Barros (RIT Student) Machine connecting bar
- Donovan Barros (RIT Student) Machine connecting bar
- Donovan Barros (RIT Student) Machine center bar
- Donovan Barros (RIT Student) Finish BRB bracket
- Donovan Barros (RIT Student) Adjust or re-cut COTS sled
- Donovan Barros (RIT Student) Print PETG large battery holder
- Donovan Barros (RIT Student) Drill mounting holes, add nuts
- Donovan Barros (RIT Student) Sand (paint?) bay
...