Skip to end of banner Go to start of banner

Meeting Notes - Avionics - 2022-01-27

Skip to end of metadata

Created by Will Merges (RIT Student), last modified on Jan 27, 2022

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Date

27 Jan 2022

Attendees

Discussion items

Item

Notes

Payload Updates

Previous Action Items:
- Ben Hyman (RIT Student) /22 Jan 2022 - verify DARWIN redesign w/ Joe
  - Joe "mostly" approved - still seeking final verification
- Will Merges (RIT Student) /22 Jan 2022 - order DARWIN v1.1 when Ben is ready
  - Need design verified by Joe first (see above action item)
- Will Merges (RIT Student) / 20 Jan 2022 - email NYSG, reimbursement never came
  - done, sent invoice, check should be in the mail soon (sent to Vanessa Mitchell)
- Yevgeniy Gorbachev (RIT Student) / - mechanical redesign (eyebolt, internal frame, sheer pins)
  - done
- Yevgeniy Gorbachev (RIT Student) Will Merges (RIT Student) / 22 Jan 2022 - order parachute bay parts from SendCutSend
  - ordered and parts arrived

Ground Station Updates

figured out low power shutdown on battery
- connect to DC-DC converter AFTER connecting input to battery
  - use double pole switch for real setup, doubles as hot swap switch
Mary Dertinger (RIT Student) & Aaron Chan (RIT Student) & Yevgeniy Gorbachev (RIT Student) redesigning bottom plate
Aaron Chan (RIT Student) working on altimeter servo
- not working with Teensy 4
  - think it's because it needs 5v logic (teensy is 3.3v)

Action items

No labels