Overview

This module interfaces with sensors and provides the data to other modules on the Back Plane.

Block Diagram

Acceleration +X

Altitude

Rotation abt X

Memory

Status LED (RGB)

Remote Temperature Sensor

Item	Notes	Status:
Update/Create Block Diagram	Update/Create before CDR	Updated Block Diagram of Main Sensor Module Create Block Diagram for PROMPT Make a more precise block diagram for Sensor+PROMPT system
Sensor Board Component Selection	Select ICs and other secondary components.	Power ripple rejection circuitry Quantify voltage ripple limits of sensors Find ripple output from power board Secondary Components Selected Identify all required secondaries & passives Accelerometer Altimeter Flash Microcontroller Magnetometer Temperature Sensor LEDs Ethernet USB Identify shared secondary components Identify the full list of passives used (Basic Parts)
PROMPT Component Selection	Select ICs and other secondary components.	Finalize IC selection Pressure Temperature LEDs Microcontroller Secondary Component Selection Use as many of the same as Sensor Board as possible LC Circuit components
Sensor Board Altium Components Created	Create or find Altium components for Sensor Board.	Passive Board Components Created ICs Created MS5607 BMP390 ADXL375 L3GD20H LIS3MDL MMA8451Q TMP117 SHTC3 STM32F446RET6 - Already Created W25Q128JVSIQ LEDs ICs Reviewed MS5607 BMP390 ADXL375 L3GD20H LIS3MDL MMA8451Q TMP117 SHTC3 W25Q128JVSIQ LEDs
PROMPT Components Created	Create or find components for PROMPT.	Passive Board Components Created ICs Created
Sensor Board Schematic Capture
PROMT Schematic Capture