Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Current »
Date
Attendees
Goals
- Decide on panelizing
- Check design rules
- Standardize silkscreens
- Test fit backplane in CAD model
Discussion items
Item | Who | Notes |
---|
Backplane | | - Connectors are no longer double stacked because of interference with connecting bars
- Silkscreen
- Ready for layout review
|
Autopilot | | |
Sensor | | |
Power | | |
Radio | | |
Software | | - ADXL,375, LIS3MDL done
- BMP390 mostly done
|
Panelizing | | - No panelizing with radio - labor intensive impedance matching
- No panelizing with power module - 2oz outer layers
- Autopilot and backplane can panelize (4 layer 1oz)
- 1 each per panel
- !! MAKE SURE BACKPLANE IS RIGHT WAY UP !!
- Sensor, SCRAP, Prompt, et al. can panelize
- Need extra considerations
- Mouse bites
- Mouse bites shouldn't be near traces (at least 1/8")
- Empty space used for sensor board clones w/ empty copper middle layers to show off
|
|
|
|
Action items
- Sensor: Remove interrupt connections
- Sensor: Route STM32 pinout
- Sensor: Update DRCe
- Backplane: Resolve DRC errors