Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Date

Attendees

Goals

  • Decide on panelizing
  • Check design rules
  • Standardize silkscreens
  • Test fit backplane in CAD model

Discussion items

ItemWhoNotes
Backplane

Billy Siegener (RIT Student) 

  • Connectors are no longer double stacked because of interference with connecting bars
  • Silkscreen
  • Ready for layout review
Autopilot

Ben Hyman (RIT Student) 

Sensor

Mary Dertinger (RIT Student) et al

  • Done with STM32 pinout
Power

James May (RIT Student) 

Radio

Dante Sivo (RIT Student) 

Software

Aaron Chan (RIT Student) Jonathan Russo (RIT Student) 

  • ADXL,375, LIS3MDL done
  • BMP390 mostly done
Panelizing

Jim Heaney (RIT Student) Yevgeniy Gorbachev (RIT Student) Billy Siegener (RIT Student) 

  • No panelizing with radio - labor intensive impedance matching
  • No panelizing with power module - 2oz outer layers
  • Autopilot and backplane can panelize (4 layer 1oz)
    • 1 each per panel
    • !! MAKE SURE BACKPLANE IS RIGHT WAY UP !!
  • Sensor, SCRAP, Prompt, et al. can panelize
    • 1 each per panel
  • Need extra considerations
    • Mouse bites
    • Mouse bites shouldn't be near traces (at least 1/8")
  • Empty space used for sensor board clones w/ empty copper middle layers to show off



Action items

  • Sensor: Remove interrupt connections
  • Sensor: Route STM32 pinout
  • Sensor: Update DRCe
  • Backplane: Resolve DRC errors
  • No labels