Semester 2
Important Dates:
March 6-13 Spring Break
April 27 Final Exams Start
| Assignee / Action Item / Description | Manufacturing Steps: | Date Assigned: | Complete By: | Completion Date: | Comments: |
|---|---|---|---|---|---|
| Assign tasks to people/groups. | 1/28/22 | Ongoing | Ongoing | We need to get groups working on specific action items. | |
| CAD Entire Rocket | 1/29/22 | ASAP | Teams need to work together to get this together. | ||
| Highlight BOM Parts to Order | 1/29/22 | Ongoing | Ongoing | Confirm parts with group, Domenic, and highlight | |
| Avionics Bay Sled | Determine materials, Order materials, 3D print/laser cut, assemble/glue | 1/24/22 | 3/5/22 | Avionics group should finalize details and CAD soon. Make parts | |
| Finalize Motor for Air brakes and order it | Re-simulate motor and selection | 1/24/22 | 2/05/22 | ||
| Order Avionics | N/A | 1/24/22 | ASAP | Proton 2x, Batteries, transmitter etc. see BOM | |
| Order & finalize parachute, eyebolts, shockcord, streamer | CAD, Calculate chute size, attach streamer | 1/28/22 | 3/5/22 | Structures team needs to figure out the parachute size needed and find a best fit for the rocket. | |
| Solder Avionics boards | Very carefully solder connections to boards | 1/28/22 | 3/5/22 | BE VERY CAREFUL NOT TO BURN IT PLEASE!!!!..... | |
| Glue Black Powder Charges | Glue in position to successfully deploy parachute | 1/28/22 | End of Av Bay manufacturing | ||
| Wire avionics bay | Connect batteries, switches, pwm board, DC motor, and set up wires for black powder charges. | 1/28/22 | End of Av Bay Manufacturing | Do not directly connect source and ground. You will have a bad time. Decide on how we are going to secure everything within the av bay. | |
| Drill holes for Switches | (Potentially) Create jig for alignment. | 1/28/22 | After wiring/installation of parts | ||
| Order electronic parts for Air brakes | Get PWM module, DC Motor, Battery, flyback diode. | 1/28/22 | ASAP | ||
| Install Motor next to airbrakes | Align correctly. | 1/28/22 | End of Av Bay Manufacturing | ||
| Finalize materials needed for air break | Finalize parts list and stock. Put needed things in BOM | 1/28/22 | ASAP | ||
| Order materials for air break | N/A | 1/28/22 | ASAP | Highlight the items | |
| CAD/Manufacture air break | N/A | 1/28/22 | CAD ASAP 3/20/22 | Airbrake group is on this | |
| Manufacture Thrust Plate | N/A | 1/28/22 | 3/20/22 | Structures on this | |
| Cut and Glue Fins | N/A | 1/28/22 | 3/20/22 | Structures on this | |
| Make and wire up black powder charges | We need to first determine the materials we need to make this. | 1/28/22 | Before we close up the rocket | We should find someone who knows how to do this. | |
| Get switch for avionics system | We also need to install it . | 1/28/22 | 3/5/22 | What switch is being used? | |
| Nose Cone | Make and glue bulkhead, order part | 1/29/22 | 3/5/22 | ||
| Four Plywood Bulkheads | CAD, order stock, cut, epoxy to tubes, FEA on top bulkhead | 1/29/22 | CAD ASAP 3/5/22 | ||
| Look into avionics alternatives | Substitute Eggtimer parts | 1/29/22 | ASAP | ||
| Update wiring diagram | N/A | 1/29/22 | ASAP | Update with new parts as needed | |
| Airbreak Calculations | FEA, Assembly, joints, snatch force | 1/29/22 | ASAP | ||
| Assemble "All or nothing" parachute system | 1/29/22 | 3/5/22 | |||
| Chute Bulkhead | CAD, FEA, I bolts, order stock, manufacture, epoxy to tubes | 1/29/22 | CAD ASAP 3/5/22 | ||
| Camera Bulkhead | CAD, FEA, determine size, order stock, manufacture, mount camera | 1/29/22 | CAD ASAP 3/5/22 | ||
| Mount Camera to bulkhead | ^ | 1/29/22 | 3/5/22 | ||
| Set Screw or L bracket into rods for AV Bay placement | Determine how its going to work, CAD, order parts, attach | 1/29/22 | 3/5/22 | ||
| Have Fun | idk | -∞ | ∞ | ∞ | Get to work |