Break Action Items

Subteam	Action Items	Assignees
Admin	Set up meetings	Alex Speyer (RIT Student)
	Complete 2nd Update	All Hands
	Begin Technical Report	Alex Speyer (RIT Student) Yevgeniy Gorbachev (RIT Student)
	Pay Entrance Fee	Alex Speyer (RIT Student)

Structures	Get grace filament for testing	Alex Durand (RIT Student)
	Begin writing up process for nosecone layup	Alex Durand (RIT Student)
	Look into CF weave options	Alex Durand (RIT Student)
	Update CAD to reflect Open Rocket	Jake Halpern (RIT Student)


Analysis	Update Tensile Testing Document	William Beckson (RIT Student)
	Bulkheads FEA	William Beckson (RIT Student)
	Boat tail FEA	William Beckson (RIT Student)
	RASAero Model	William Beckson (RIT Student)
	Start writing summaries for tech paper	William Beckson (RIT Student)




Avionics	Plastics research	Donovan Barros (RIT Student)
	Figure out Wiring Harness	Aaron Chan (RIT Student)
	Look into using all 1/4 inch Delrin	?Donovan Barros (RIT Student)?




Backplane	Test and debug W25Q software	Aaron Chan (RIT Student)
	Test and debug BMP software	Aaron Chan (RIT Student)
	Test and debug LED software	Aaron Chan (RIT Student)
	Test and debug ~~MS5607~~ ADXL software	Akhil Devarapalli (RIT Student)
	Backplane Schematic	Billy Siegener (RIT Student)
	Autopilot Schematic	Ben Hyman (RIT Student)
	Power Schematic	James May (RIT Student)
	Radio Schematic	Dante Sivo (RIT Student)
	Sensor Schematic	Louis Fleisher (RIT Student) Mary Dertinger (RIT Student)
Payload	Find speed payload needs to fall
	Find snatch force at 150 ft/s	Grace Dertinger (RIT Alumni)
	Update BOM	Louis Fleisher (RIT Student)
	Finish airbrake CAD - with and without loadcell, make sure antenna fits	Grace Dertinger (RIT Alumni) Mary Dertinger (RIT Student) Jonah Gimmi (RIT Student)
	Spec load cell	Grace Dertinger (RIT Alumni)
	Determine ~~streamer length~~ chute
	Run FEA
	Component Selection	Louis Fleisher (RIT Student)
	AV bay layout	Mary Dertinger (RIT Student) Jonah Gimmi (RIT Student)
	AV bay CAD	Mary Dertinger (RIT Student) Jonah Gimmi (RIT Student) Riley Quinn (RIT Student)
	Footprint and schematic for SCRAP	Jim Heaney (RIT Student)
Reaction Wheel	Fix integration Issue	John Ye
	Separate Magnetic sensor and encoder	John Ye
	Make new board	John Ye
	Change software of new board	John Ye



Recovery	make sure all components arrive	James May (RIT Student)
	Determine preliminary layout	James May (RIT Student)
	Conduct tender descender test	James May (RIT Student)
	Update OR recovery component weights	James May (RIT Student)
	Locate viable flame blanket	James May (RIT Student)
	Begin FDR slides	James May (RIT Student)

Other	make video challenge script	William Beckson (RIT Student)