Meeting Notes - Avionics - 2023-01-25

Updates:

• Confirmed Vocore pin state is input
• Schematic 99% done
  • Came up with a few more changes today.
    • Have LED1 connect to Vocore power out to confirm power on
    • 220u brownout capacitors
  • Ready to be reviewed
• Layout ~80% done
  • All components are placed and most routed. Mainly just need to route backplane connector 

TODOs:

• Schematic:
  • Add brownout capacitors
  • Connect vocore 3v3 out to backplane LED1 instead of its own LED as it is currently
• Layout:
  • Finish routing 
  • Run DRC and deal with errors

Updates:

• All sensor schematics done.
• STM32 and Backplane interface almost done.

 TODOS:

• Review schematics with team
• Start layout!