4/6/2023 - 4/13/2023

Subteam	Action Items	Further Action Items
Structures	Finish nose cone bondo sand poly drill holes need jig for payload vent holes in parachute bay shear pins vent holes in av bay screw holes for couplers fix tip keying tabs stability analysis
Avionics	get new connectors for BRB battery make connectors make wiring harness vacuum test avionics cut av bay route delrin end caps laser support bars test brackets for batteries and connect print screw switch brackets print backplane battery bracker integration guide order tamiya Get FRS radio	Recut COTS sled
Backplane	fix radio module order power module putting altimeter in place of backplane need weight for test launch flying the battery for backplane Testing RFM range at test launch
Payload	Av bay BRB needs standoffs and mount Print SABOT print FC mount and add heat inserts print battery mount and mount x2 print scrap mount and mount make dummy scrap with ultralogger -Jim 3D print screw switch mount tap support bar 3D print antenna clips reduce weight in chute bay Assemble and wire COTS Av -Louis Write procedures
Recovery	Deployment testing Thursday night Assemble recovery harness test remaining TD-2s Main parachute bag test how easy does it stay in there? how easy does it pull out Write and PRACTICE integration procedures Figure out stringing
Poster
Other