Action Items For Tuatara

Hey guys! This is what we discussed last week but it is not everything that will come up. Please add and check off tasks! Thanks! Wynter M. Petersen (RIT Student) 


Structures

Nose Cone

Task

Assigned 

Comments/Progress/Blockers

Design

  • CAD



  • Order


hardware?

Manufacture



  • Cut off Bottom portion of Nose Cone


Assembly 



  • Friction fit + retention screws


Airframe

Task

Assigned 

Comments/Progress/Blockers

Design

  • Length  Cals from OR



  • Put all CAD components into assy for rocket


  • CAD



  • Jig for Slot cutting and Ave bay holes


  • Order Tubes

hardware?
Manufacture

  • Holes for Ave Bay (laser cut/Drill?)
Bo Goldenprobably drill
  • Holes for chutes
Bo Golden
  • Slot for Fins(laser cut/dremmel?)
Bo Golden
Assembly

  • Assembly order of everything then slide in/epoxy


Bulkheads x5

Task

Assigned 

Comments/Progress/Blockers

Design

  • Snatch Force Calc



  • CAD

Joshua Rosenberg


  • FEA? 
Leo Zhengmay not be needed but could be fun (bolts, motor attachments, blue tube)
  • Order/find 1/2 plywood

hardware?
Manufacture

  • CAM


  • Cut on CNC Router


Assembly

  • Epoxy to tube


  • Thread Ibolts


Centering Rings x4

Task

Assigned 

Comments/Progress/Blockers

Design

  • CAD



  • Order/find stock

1/8 in ply
Manufacture

  • CAM
Bo, Brooke, Joshua, Andrew L

Completed via laser cutter


  • Run on Router
Assembly

  • ORDER of assembly


  • Epoxy/rods?


Smaller Centering Ring x2 (I forgot what you guys actually called this lol)

Task

Assigned 

Comments/Progress/Blockers

Design

  • CAD



  • Order/find stock

1/8 in ply
Manufacture

  • CAM

Bo, Brooke, Joshua, Andrew L
Completed through laser cutter

  • Run on Router
Assembly

  • ORDER of assembly


  • Epoxy/rods?


Metal Centering Ring x1

Task

Assigned 

Comments/Progress/Blockers

Design

  • CAD


Blocked due to unknown number of Ibolts
  • FEA with Ibolt

Decide the number of Ibolts
  • Order/find stock

what is the stock? albumin thickness?hardware?
Manufacture

  • CAM


  • Tormach or Protrak

Can be either protrak or tormach, tormach might be easier
Assembly

  • ORDER of assembly


  • Loctite Ibolts


  • epoxy ibolt to plate


  • epoxy to motor tube


  • epoxy to airframe


Fins

Task

Assigned 

Comments/Progress/Blockers

Design

  • CAD



  • Fin Flutter Calcs


  • Order/find Fiber Glass stock

Stock changed to carbon fiber

Cutting to be done 04/04

  • Spacer Jig for epoxy


  • Ensure slots in Frame are right size and position


Manufacture

  • CAM

Bo, Sierra, Joshua, Andrew S

  • Run on Crushinator
GLOVES
Assembly

  • ORDER of assembly


  • Epoxy


  • Slide into airframe slots


Payload Thrust Plate x1

Task

Assigned 

Comments/Progress/Blockers

Design

  • CAD

  • FEA

  • Order/find stock

Confirm al 1/2in? hardware?
Manufacture

  • CAM

  • Tormach


Assembly

  • ORDER of assembly


  • Thread/mount


Motor Retainer x2

Task

Assigned 

Comments/Progress/Blockers

Design

  • CAD



  • FEA on threaded rods...


  • Order/find stock 

confirm al 1/2in? hardware?
Manufacture

  • CAM


  • Tormach


Assembly

  • ORDER of aassy


Add other bullets please (smile)



Motor Tube x2

Task

Assigned 

Comments/Progress/Blockers

Design

  • CAD
  • Make Fin spacers 

Bo, Eve 


  • Black powder calc


  • Order tube

hardware?
Manufacture

  • Cut Tube to length
Bo, Andrew L, Andrew S
Assembly

  • ORDER of assembly
Bo
  • Epoxy centering rings


  • epoxy cuppler tube


  • Fin slots/spacer for alignment

make spacers
  • Slide into Tube (smile)


Bottom Stage...? please fill out

Task

Assigned 

Comments/Progress/Blockers

Design

  • Standard L2 bottom
  • centering rings epoxyed to motor tube
  • Top centering ring is metal (see section)

Team


  • Standard motor retainer/thrustplate setup
Cornelius O'Leary (RIT Student) 



Manufacture

  • Cut airframe
  • Cut motor tube
  • Cut fin slots
Bo, Andrew L



Assembly

  • Epoxy centering rings to motor tube as specified in OR
  • epoxy motor mount setup into airframe 
  • epoxy thrust plate to bottom of the stage
  • Let dry!!!


  • Epoxy in fins 


Avionics

Av bay

Task

Assigned 

Comments/Progress/Blockers

Design

  • CAD


hardware?
  • Wire placement/hole in other parts for wirers
Sierra Dacey (RIT Student) super imporant to get ahead of this before manufacturing starts
  • Order electronics
  • Find Wood stock 
  • Find eggtimer
  • explore other options for electronics if low inventory
  • order new 7.4 V (2S) Lipo batteries x6

Manufacture

  • 3D print Av caps
  •  
Eve 
  • Laser cut Wood


Assembly

  • glue 3d printed and wood parts together

  • Thread bolts


  • Assemble flight computers


Camera

Task

Assigned 

Comments/Progress/Blockers

Design

Camera most likely 86'ed, unless cheap alternative found or team pitches in


  • CAD/Assembly


  • Pick Camera

  • Order electronics

Manufacture
  • 3D print case

Assembly
  • Epoxy to body tube

Imagine RIT Poster

TaskAssignedComments/Progress/Blocker
  • Create Poster (April 13th)

  • Finalize Logo