Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 4
Next »
Date
Attendees
Goals
- Review power, backplane, sensor schematics
Discussion items
Item | Who | Notes |
---|
|
|
|
Autopilot Module | Ben Hyman (RIT Student) | Updates: - Confirmed Vocore pin state is input
- Schematic 99% done
- Came up with a few more changes today.
- Have LED1 connect to Vocore power out to confirm power on
- 220u brownout capacitors
- Ready to be reviewed
- Layout ~80% done
- All components are placed and most routed. Mainly just need to route backplane connector
TODOs: - Schematic:
- Add brownout capacitors
- Connect vocore 3v3 out to backplane LED1 instead of its own LED as it is currently
- Layout:
- Finish routing
- Run DRC and deal with errors
|
Sensor Module Updates | | Updates: - All sensor schematics done.
- STM32 and Backplane interface almost done.
TODOS: - Review schematics with team
- Start layout!
|
Action items