Meeting notes 24-25

Backplane SW update

@Richard Sommers (RIT Student) @Aaron Chan (RIT Student)

Rewrote FSW or at least lots of libs. Can run FSW from machine

GS update

@Aaron Chan (RIT Student) @Mary Dertinger (RIT Student)

Started rewrite

Got requirements done

Backplane SW update

@Aaron Chan (RIT Student) @Richard Sommers (RIT Student)

@Richard Sommers (RIT Student) Did a data logging lib
Sensor mod, power and radio and almost done integrating with software stack

GS update

@Oscar Gigon (RIT Student)

Been collecting SW from git @Will Merges (RIT Student) Tinseey code from @Aaron Chan (RIT Student)

Liquids

@Jonah Gimmi (RIT Student) @Riley Quinn (RIT Student) @Jake G @Oscar Gigon (RIT Student)

Not much but ready for AVI!!

BBL box

@Dean O'Brien (RIT Student) @Mary Dertinger (RIT Student)

@Jonathan Godfrey (RIT Student) Finished CAD in fusion
@Mary Dertinger (RIT Student) Hasn't done anything sorry need to talk to Jonathan

Deployment Module

@Damian Suarez (RIT Student)

Meet to talk about with @Mary Dertinger (RIT Student) @Aaron Chan (RIT Student)

GS update

@Mary Dertinger (RIT Student)

Not getting Framework until winter break

Liquids

Not here but gave Oscar Wills contact info

HAB BBL box

@Dean O'Brien (RIT Student) @Mary Dertinger (RIT Student) @Jonathan Godfrey (RIT Student)

Nothing

Deployment Module

@Damian Suarez (RIT Student)

@Natalia Sokolov (RIT Student) @Richard Sommers (RIT Student)

Nothing

@Natalia Sokolov (RIT Student) worked on stm cube

@Richard Sommers (RIT Student) worked on event detection

@Damian Suarez (RIT Student) worked on slideshow

Literally nothing.

“UH” - @Natalia Sokolov (RIT Student)

GS update

@Mary Dertinger (RIT Student)
@Chris Seibak (RIT Student) @Declan Flood (RIT Student) @ Zach

• Still brainstorming and updated wiki

Liquids

@Oscar Gigon (RIT Student)

• going pretty good.

• 490 feet of cat 5 in the basement ….

• Emailed @Will Merges (RIT Student) about GRAFANA

HAB BBL box

@Gautham Mutyala (RIT Student) @Ben Fass (RIT Student) @Liam Kelly (RIT Student) …

• Made lucid chart

• Started selecting parts

RunCam board

@Zack Millevoi (RIT Student) @Everett Gianni (RIT Student) …

• High level diagram done

• Start selecting components

• Deciding if we are doing radio silliness (activating before launch)

Backplane SW

@Aaron Chan (RIT Student) @Richard Sommers (RIT Student) @Liam Kelly (RIT Student)

• Aaron merged in sensor telemetry code

• simulation works

• started working on radio mod telemetry

• @Richard Sommers (RIT Student) worked on making open rocket sensor better - fixes and randomness (not perfect sensors)

GSW

@Aaron Chan (RIT Student) @Stephen Zelazny-Medina (RIT Student)

• Interface with influxdb and grafana

• GSW minimal is done – made more useable for non power users

• @Stephen Zelazny-Medina (RIT Student) did some optimization

• @Stephen Zelazny-Medina (RIT Student) wrote a script that runs the GSW as a service but untested

Deployment Module

@Damian Suarez (RIT Student)

@Natalia Sokolov (RIT Student) @Richard Sommers (RIT Student)

timeline, talked about sensor(sensor mod ones), looked into what processor to use(picked a model need to decide on package), discussed stand alone aspec

GS update

@Mary Dertinger (RIT Student)
@Chris Seibak (RIT Student) @Declan Flood (RIT Student) @ Zach

• Made crude hardware schematic

Liquids

@Oscar Gigon (RIT Student)

HAB BBL box

@Gautham Mutyala (RIT Student) @Ben Fass (RIT Student) @Liam Kelly (RIT Student) …

• still selecting parts

RunCam board

@Zack Millevoi (RIT Student) @Everett Gianni (RIT Student) …

• still selecting parts

Backplane SW

@Aaron Chan (RIT Student) @Richard Sommers (RIT Student) @Liam Kelly (RIT Student)

• Power mod SW merged, telemrty SW merged, magnatometers are evil - Richie

GSW

@Aaron Chan (RIT Student) @Stephen Zelazny-Medina (RIT Student)

• Stephen hasnt done anything

Deployment Module

@Damian Suarez (RIT Student)

@Natalia Sokolov (RIT Student) @Richard Sommers (RIT Student)

• Testing Brainboard → appears to work woop woop

• Appears to detect continuity for a wire

• PDR today

•  

GS update

@Mary Dertinger (RIT Student)
@Chris Seibak (RIT Student) @Declan Flood (RIT Student) @ Zach

• Still specing out c omponents

Liquids

@Oscar Gigon (RIT Student)

• Got a servo valve running!!

• Waiting on stuff to arrive

HAB BBL box

@Gautham Mutyala (RIT Student) @Ben Fass (RIT Student) @Liam Kelly (RIT Student) …

• Looking at different micro controllers

• still looking at atimeters

• need mary to teach altium

RunCam board

@Zack Millevoi (RIT Student) @Everett Gianni (RIT Student) …

• Rough component selection done

• need mary to teach altium

Backplane SW

@Aaron Chan (RIT Student) @Richard Sommers (RIT Student) @Liam Kelly (RIT Student)

• Not much

• Radio module SW RIGHT NOW

• Richie PR did not go through “sorry richie” -Aaron

GSW

@Aaron Chan (RIT Student) @Stephen Zelazny-Medina (RIT Student)

• Made progress … ? but linux feature is not good :((((((

IREC Avi

@Emma Ferraro (RIT Student) @Stephen Zelazny-Medina (RIT Student)

• PDR went well

• Gave people jobs

Deployment Module

@Damian Suarez (RIT Student)

@Natalia Sokolov (RIT Student) @Richard Sommers (RIT Student)

• Looked at different STM series and respecing based on PDR feedback

GS update

@Mary Dertinger (RIT Student)
@Chris Seibak (RIT Student) @Declan Flood (RIT Student)

• New schematic

• New choices for components

Liquids

@Oscar Gigon (RIT Student)

HAB BBL box

@Gautham Mutyala (RIT Student) @Ben Fass (RIT Student) @Liam Kelly (RIT Student) …

• Parts finalized

• Switching out MCU

• Switched out parts to ones on JLC

• Found a voltage regulator

RunCam board

@Zack Millevoi (RIT Student) @Everett Gianni (RIT Student) …

• Found a voltage regulator

• Found a battery WITH LEADS

Backplane SW

@Aaron Chan (RIT Student) @Richard Sommers (RIT Student) @Liam Kelly (RIT Student)

• Radio mod SW issues, working on a new design

• Richie did random stuff lol

GSW

@Aaron Chan (RIT Student) @Stephen Zelazny-Medina (RIT Student)

• Merged the thing that lets it run as a service

IREC Avi

@Emma Ferraro (RIT Student) @Stephen Zelazny-Medina (RIT Student)

• Tested RRC3, 6ish working ones 7 that work

• We need to talk to Mary about backplane

Deployment Module

@Damian Suarez (RIT Student)

@Natalia Sokolov (RIT Student) @Richard Sommers (RIT Student)

• Got estimate for gyro error

• Buzzer

• new STM drop WOOP WOOP

• Schematic things

• Ethernet PHY

GS update

@Mary Dertinger (RIT Student)
@Chris Seibak (RIT Student) @Declan Flood (RIT Student)

• Working on down selecting components

• Doing more research with SDR

Liquids

@Oscar Gigon (RIT Student)

• Last Saturday got UPD packets and will move a servo!!

• 2 mece independent servos into 1

• Connectors for DAQ

• Thermocouple values from DAQ on tues

HAB BBL box

@Gautham Mutyala (RIT Student) @Ben Fass (RIT Student) @Liam Kelly (RIT Student) …

• Started Altium

• Maybe switching out sensor bc of Mr. Balloon

RunCam board

@Zack Millevoi (RIT Student) @Everett Gianni (RIT Student) …

• Spent hour and a half trying to get load switch into altium while @Everett Gianni (RIT Student) tried to get a fork

• Found a battery

• Finished Drain timeline diagram

Backplane SW

@Aaron Chan (RIT Student) @Richard Sommers (RIT Student) @Liam Kelly (RIT Student)

• Richie worked phase detection, and we have it simulated demo/proposal

• Continued to work on radio mod stuff hopefully done within next week or two

• RS485 class needs to be tested to test sensor mod again

• delegating async and RS485 to Stephen

GSW

@Aaron Chan (RIT Student) @Stephen Zelazny-Medina (RIT Student)

• Nothing

IREC Avi

@Emma Ferraro (RIT Student) @Stephen Zelazny-Medina (RIT Student)

• Did fan testing, doesnt impact pressure

• Down selected components!!!

• Alan gave us more work

Deployment Module

@Damian Suarez (RIT Student)

@Natalia Sokolov (RIT Student) @Richard Sommers (RIT Student)

• We were supposed to have schematic review today but not ready

• Need to update some components and symbols to make sure they are launch standard

• need to check new STM

GS update

@Mary Dertinger (RIT Student)
@Chris Seibak (RIT Student) @Declan Flood (RIT Student)

• Not too much just continuing on comonent selection

Liquids

@Oscar Gigon (RIT Student)

• Did not end up testing the DAQ on Saturday because I have been teaching people CAD

• Exiting new high speed imagining project for injector spray angle and velocity

HAB BBL box

@Gautham Mutyala (RIT Student) @Ben Fass (RIT Student) @Liam Kelly (RIT Student) …

• Working on schemtaics

• Created footprints

RunCam board

@Zack Millevoi (RIT Student) @Everett Gianni (RIT Student) …

• Schematic for boost converter is almost done

• Need to import micro controller and JST

• Something about blowing up an LED

• Box form factor is changing - rotate and squish

Backplane SW

@Aaron Chan (RIT Student) @Richard Sommers (RIT Student) @Liam Kelly (RIT Student)

• Fixed some bugs in Sensor mod code

• Added SW timer library

• Can't reproduce I2C lockup issue but it is magically working now ?????

GSW

@Aaron Chan (RIT Student) @Stephen Zelazny-Medina (RIT Student)

• Made it so configuration is publish to shared memory

IREC Avi

@Emma Ferraro (RIT Student) @Stephen Zelazny-Medina (RIT Student)

• Not here