/
LOW-4050

LOW-4050

Owned by Dave J Ballard
Dec 10, 2024
1 min read

Overflow Monitors

There are two overflow monitors located in the storage along the east wall of LOW-4050. Here’s the process to use those monitors if needed:

  • Make sure the podium and projectors are turned OFF.

  • Plug the monitor into power and network.

  • Wait 5 minutes for the networking gear on the overflow monitors to boot.

    • If you do not wait the 5 minutes, the system may not work properly.

  • After 5 minutes, power up the podium like normal. The overflow monitors will mirror the right projector only.

Saunders Technical Support