/
Laptop Stand

Laptop Stand

Owned by Dave J Ballard
Last updated: Aug 20, 2021 by Matthew Arlauckas

Table of Contents

Parts List

All parts are 1/2" PVC pipe and connectors

  • 2 - 2" pipes
  • 2 - 3.5" pipes
  • 2 - 4.25" pipes
  • 2 - 9" pipes
  • 2 - T connectors
  • 6 - Right Angle connectors

Assembly

Step 1

Parts Needed:

  • 1 - 9" pipe
  • 2 - Right Angle connectors

Instructions:

Add the right angle connectors to the ends of the 9" pipe.

Step 2

Parts Needed:

  • 2 - 2" pipes

Instructions:

Add the 2" pipes to the two right angle connectors.

Step 3

Parts Needed:

  • 2 - T connectors

Instructions:

Add the T connectors to the ends of the 2" pipes.

Step 4

Parts Needed:

  • 2 - 3.5" pipes

Instructions:

Add the 3.5" pipes to the ends of the T connectors.

Step 5

Parts Needed:

  • 2 - Right Angle connectors

Instructions:

Add the Right Angle connectors to the ends of the 3.5" pipes.

Step 6

Parts Needed:

  • 2 - 4.25" pipes

Instructions:

Add the 4.25" pipes to the top of the T connectors in the middle.

Step 7

Parts Needed:

  • 1 - 9" pipe
  • 2 - Right Angle connectors

Instructions:

Add the right angle connectors to the ends of the 9" pipe. This is a second set same as step 1.

Step 8

Instructions:

Take the piece from Step 7 and add to the top of the 4" pipes from Step 6.

Step 9

Instructions:

Add the laptop to the stand.

Credit

Thanks to Matthew Arlauckas for creating this!

Saunders Technical Support