This Confluence space has been migrated and is no longer current. The content on this space will no longer be accessible after July 1, 2026.
1/19/2023
Sub team | Last Week Action Items | Weekly Update | Action Items | Blockers |
|---|---|---|---|---|
Structures | get Grace filament. @Alex Durand (RIT Student) Wind booster @Jake Halpern (RIT Student) Machine parts @Nathan Aquilio (RIT Student) | doing PLA mold with coating and implementing a coupler shoulder | Change mold file Start printing mold wind booster |
|
Avionics | Wiring Harness schematic and layout complete first 3 weeks of classes (BP) | master to do lists made for backplane need to use dsubs again | Finish schematics start review start layouts | waiting for breakout boards skill issue |
Payload | Check with Grace about accuracy and completeness of CAD schematic 90% done for SCRAP | finishing CAD Sat. Schematics done in week or 2 change code to basic arduino - worse code but no skill issue (Jim and Aaron decision) | Figure out software finish schematic finalize CAD |
|
Analysis | RasAero walkthrough in first few weeks Tech Paper summaries ANSYS Payload FEA | need to fill out application for ANSYS | Payload FEA ANSYS General 5 min RasAero |
|
Reaction Wheel | software for motor drivers written | Finalize test bed rocket design drivers for encoder control code further integration |
| |
Recovery |
| Break Action Items: make sure all components arrive Determine preliminary layout Conduct tender descender test Update OR recovery component weights Locate viable flame blanket Begin FDR slides | Figure out where the rocketman order went with @Louis Fleisher (RIT Student) Figure out where I can test tender descenders Start testing tender descenders |
|
Other: |
| Video challenge work |
|
|